I Thought About It...

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
SEE PIC

There is a beautiful droptop 89 GT sitting down the road from me. I pass it everyday on the way home. Once I even saw the top down while it was raining! :fuss:

So yesterday I stopped to say hello to it. New red paint, new black top, BLACK LEATHER INTERIOR, 5 speed, 3:55's, roller rockers, 130k...

Me: OMGHiiiii2U :)

The salesman came out and said they wanted $6,900 for it...

Me: WTF? :jaw:

So I said, "Well pop the hood." I saw painted blue factory heads, no smog pump, a huge weld job going from one side of a factory intake to the other, a Vortech sticker on the fan shroud, and everything had new gaskets...

Me: :lol:

In my mind this is what happened to this poor car. Some asshat put a vortech on it, put the dizzy on 180 degrees out, and blew the intake in half. Then he welded it back together. It's obvious that the heads have been off so that's not reassuring either.

Anywho, before he popped the hood I'd have given him 4k for it. :nonono:
 

Attachments

  • redvert.webp
    redvert.webp
    31.5 KB · Views: 235
I'd offer him half of that.
3k+ new 302 = nice car
:shrug:
for some reason dealerships seem to think these things are priceless when they sell them ad worthless when they take them on trade ins. And I really hate when the salesman thinks he knows what he's talking about
 
Doesn't look like an 89 to Me. Small headrests and black gut say 1990+

Sure the intake wasn't cut open to port the runners? If the guy had a vortech on it, it would make more sense he would do that vs pay to weld it up vs buying a stock upper for 10
 
I own and have restored two of these verts. Of course the dealer is going to price it high to start off. He'll come down off that if you make him a reasonable offer I'm sure. In reality that price is about right on that car in excellent condition. He'll probably end up getting around $5k or slightly higher after its all said and done.

The Fox cars are quickly rising in value now. The current economy is holding everything down temporarily.
I check the NADA guide regularly to see how my fox's are holding up. Lately I have been impressed.

I'd have to see the car in person and pick it apart myself. From the single pic it looks like a pretty nice fox vert. Still stock exterior, thats a "plus". Stock ride height. Pony rims, (weren't offered in '89). You say new top, thats a $1000 bucks right there. (Been there done that) twice. If the quality of the new paint and black leather is nice thats worth alot. 3.55's are much a huge performance increase from the stock 2.73's. Saved some money right there on that mandatory upgrade. LOL


I'd be willing to bet as well that the stock intake has been opened for porting ect. Never heard of blowing the intake on a Fox with a blower. It can be replaced used for less than $100 bucks. Who knows what happened to this engine in the past.
But I have learned over the years that the 5.0 is a solid engine. 130k is nothing. If it ain't smoking and knocking it will continue to perform. These are so cheap to replace, upgrade and/or repair these days.

In short (LOL), If you like it go back drive it and offer him $4K. Ya never know



Good Luck
 
I have heard of blowing apart an intake, but it was a Cobra intake on a built engine. I'd have to find that article, but it was on top of a boost+juice engine. Nitrous backfire, I think. It's possible.
 
I have heard of blowing apart an intake, but it was a Cobra intake on a built engine. I'd have to find that article, but it was on top of a boost+juice engine. Nitrous backfire, I think. It's possible.

I agree, but if it was a nitrous backfire it wouldnt be a straight weld across every runner, it would be picking up pieces of aluminum in the engine compartment for monrths after, I also dont think the level of boost on a stock 5.0 motor would ever blow an aluminum intake apart. Guys have put F1r's on stock motors and the intakes are still in one piece
 
I agree, but if it was a nitrous backfire it wouldnt be a straight weld across every runner, it would be picking up pieces of aluminum in the engine compartment for monrths after, I also dont think the level of boost on a stock 5.0 motor would ever blow an aluminum intake apart. Guys have put F1r's on stock motors and the intakes are still in one piece

Oh I agree. Just speculating at this point.
 
Usually that section of the intake is removed to gain access to the inside of the intake for porting. Did it look like it had been welded all the way around or just on top?
 
I don't know about you guys, but I've never seen something blow up in a straight line. Even when things fail along a weak point, it's never that cleanly. The intake has probably been modified in some way, but I guess we'll never know since Strype isn't buying the thing.