• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Identifying heads

  • Thread starter Thread starter subcreep
  • Start date Start date Jan 16, 2006

subcreep

New Member
Dec 1, 2003
30
0
0
Jax, FL
Jan 16, 2006
#1
  • Jan 16, 2006
  • #1
I just bought a '92 hatchback that hauls..... It has an aftermarket mass air sensor and throttlebody, gt-40 intake, cold air induction and an unknown crane cam. This car isjust plain fast, but I can't see how it could be this fast with stock heads. How can I identify what type of heads I have? The valve covers are stock 5.0 if it's any help.
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
Jan 16, 2006
#2
  • Jan 16, 2006
  • #2
The casting numbers are casted into the heads.. The bad news is you can only see them if you remove the lower intake and use a mirror to locate them.
If you happen to have gt40 heads they will have the gt40 casted into the front lower corner of the heads,
Dont discount stock headed cars as slow. There are several stock headed stangs in the 12's NA. They could be ported stock heads also.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jan 16, 2006
#3
  • Jan 16, 2006
  • #3
if u see 3 lines on the front of the head u have GT-40
if u see 4 lines on the front of the head u have GT-40P
 

dw89lx

New Member
May 7, 2005
44
0
0
Boston, MA
Jan 16, 2006
#4
  • Jan 16, 2006
  • #4
GT40 iron heads have three vertical lines cast on the ends of each head. You can see them if you are looking from the front of the engine bay. I think they have GT stamped on them somewhere as well.
 

Realmongo

I prefer to be called "Evil Genius"
Founding Member
Oct 10, 2001
2,466
86
99
Western Mass
Jan 16, 2006
#5
  • Jan 16, 2006
  • #5
Are the heads aluminum or cast iron? If they are cast iron, are there any letters on it down in front of the pasenger side front sparkplug?
 

subcreep

New Member
Dec 1, 2003
30
0
0
Jax, FL
Jan 16, 2006
#6
  • Jan 16, 2006
  • #6
I'll check in the morning for any evidence on the front of the heads. Thanks all.
 
You must log in or register to reply here.

Similar threads

I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
184
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
242
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
336
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?