idle and hesitation problems....

akrabu99

New Member
Aug 7, 2007
2
0
0
Hello,
Just bought my 94 5.0 a week ago seemed to run fine at the time.
But it developed a hesitation when accelerating from a dead stop....seems worse when the engine is up to temp. Also i notice a slight stumble in the idle. I replaced plugs wires rotor and cap today to no avail.( the plugs/wires rotor and cap all seemed to be in decent shape //only average wear) Also the car has a new egr ....reciept left in the car. The only other thing... is that the car seems to be pretty hard on gas. I have done a preliminary check of all vaccuum hoses and they seem to be intact. There is no service engine light on.
Any help would be greatly appreciated.
 
See "Surging Idle Checklist for help with all your idle/stall problems. The first two posts contain all the updates to the fixes. I continue to update it as more people post fixes or ask questions.

All the answers to your current problems are in there, since part of the tech note tells how to dump the codes. Codes may be present in the computer even if the Check Engine light isn’t on.
 
back with codes 536 632

Well in an attempt to find my hesitation problems..i retreived these codes

536.....brake on/off (boo) circuit failure/not activated during the KOER
632.....transmission control swith(tcs) did not change states during KOER

I read the basic description of each....but what do they mean?..how to fix them..?
I dont think they have anything to do with my hesitation/idle prob.
Any idea's
thx for the info