• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

If you had $2000 to spend on the stang...

  • Thread starter Thread starter jermy82
  • Start date Start date Mar 29, 2004
  • 1
  • 2
Next
1 of 2 Next Last

jermy82

Founding Member
Feb 2, 2002
446
0
0
Sherman, Illinois
Mar 29, 2004
#1
  • Mar 29, 2004
  • #1
So I guess this started this weekend when I went out and test drove Mach 1. In all honestly of course I wan't gonna buy it, but I wanted to see how it felt. They did a credit check as I bull****ted with the salesman and not to my surprise I really have no credit. So I think I'll take out a small loan, say $2000 to just blow on my car (have a friend cosign for me). I was originally stuck on just doing heads...probably Twisted Wedge...but don't know if I need to deal with different roller rockers or other stuff for them...sorry not too educated on the subject. I haven't ruled that out, but I do need to finish my exhaust, get an intake manifold, torque converter, and shift kit. Maybe not all at once....hell, I don't know. Just give me your suggestions. Keep in mind that if I do heads there's pretty much no way I'm gonna install them myself so take into account install costs. Tell me what you think. Thanks.
 

VIPERn94Five-0

Founding Member
Apr 28, 2002
3,352
2
58
Poughkeepsie, NY
Mar 29, 2004
#2
  • Mar 29, 2004
  • #2
Id give Ed Curtis at FTI a call or email.....because id get an Edelbrock Performer manifold....an FTI custom cam...and either some AFR 165's or the new design edelbrock heads....


Anthony
 
R

rudeone707

New Member
May 17, 2003
1,829
0
0
Fairfield, Ca
Mar 29, 2004
#3
  • Mar 29, 2004
  • #3
A stall and a shift kit will really wak your car up. In your position i would do intake, cat back, stall, and shift kit.
 

VIPERn94Five-0

Founding Member
Apr 28, 2002
3,352
2
58
Poughkeepsie, NY
Mar 29, 2004
#4
  • Mar 29, 2004
  • #4
ahh...i missed the no self installation thing....2 grand aint gonna cut it then....and im not sure how much the average shop will charge to do that....id think about waking up the AODE then with a stall and a shift kit....and an intake manifold....



Anthony
 
C

CivicEater

New Member
Jan 29, 2004
579
0
0
Mar 29, 2004
#5
  • Mar 29, 2004
  • #5
get 2500, then get stall/shift , and a nice used blower less hassle and you could probably install yourself with minimal probs ....then work for a few months to throw on some used inj's and a maf
 
3

331 cobra

New Member
Oct 14, 2003
398
0
0
Silicon Valley CA
Mar 29, 2004
#6
  • Mar 29, 2004
  • #6
Unless you are buying a new car, or refinancing a car, that loan will be a signature loan and you will get raped on the intrest. If you know you can pay this off in a year, I would look at summit, they have 1 year no interest on $500+ purchases with their new credit card.

Otherwise, just save up because it isn't a good idea to get so leveraged that you can't fix your car if it breaks.
 

IMissMy93Fox

New Member
Mar 9, 2004
143
0
0
Mar 29, 2004
#7
  • Mar 29, 2004
  • #7
I say get 2500 and go with Heads, cam and intake... well pretty much what vipern94five-0 said. See if you can find some parts like the manifold used too, that'll save some $$$
 

jermy82

Founding Member
Feb 2, 2002
446
0
0
Sherman, Illinois
Mar 29, 2004
#8
  • Mar 29, 2004
  • #8
I can definately pay this off in a year or less. I could almost pay for it with cash now, but I want to do the loan thing for credit reasons. If the cosigner has pretty much perfect credit I would think the rate would be lower, but I could be wrong. Besides, how much interest could it possibly be for this small of a loan for a year or so.

CivicEater--Really want to go for the NA combo, but thanks for the suggestion.

331 Cobra--Thanks for the advice on summit. Doesn't sound too bad, but with pretty much zero credit history, could I even get the credit card in the first place?

I think if I do an intake (350-400)...could probably install myself, catback (250-300) could definately do myself, and torque converter/trans. cooler (300 give or take) which I don't have a clue on install, that would make me pretty happy and open it up for heads a bit better for some time down the road. That's only a grand for parts and that would be easier to pay off quickly and then maybe with a little bit of luck and some footing established I could do another one of these on my own next time. Just what I'm thinking right now. Keep the suggestions coming and thanks for the opinions so far.
 

1105

I AM the random post master...bow down
May 3, 2003
3,841
0
0
Daytona Bch, FL
Mar 29, 2004
#9
  • Mar 29, 2004
  • #9
Give the $2000 to me, I'll buy what your car needs, install it, and keep the left over money for payment
 
3

331 cobra

New Member
Oct 14, 2003
398
0
0
Silicon Valley CA
Mar 29, 2004
#10
  • Mar 29, 2004
  • #10
I have the credit to get a loan for full blue book on my mustang, I'm not sure how much my bank would loan me for a new car. I got 3.95% on my car loan and a signature loan was 13%. It isn't any better than a credit card.

The reason is that a signature loan has no collateral. That sounds like what you are trying to do.

Almost any one can get a credit card if they have a source of income. If you can't get a summit card, try to get a visa. You won't get the zero interest for 12 months, but you will build your credit, and you can shop anywhere.
 

jermy82

Founding Member
Feb 2, 2002
446
0
0
Sherman, Illinois
Mar 29, 2004
#11
  • Mar 29, 2004
  • #11
331 cobra said:
I have the credit to get a loan for full blue book on my mustang, I'm not sure how much my bank would loan me for a new car. I got 3.95% on my car loan and a signature loan was 13%. It isn't any better than a credit card.

The reason is that a signature loan has no collateral. That sounds like what you are trying to do.

Almost any one can get a credit card if they have a source of income. If you can't get a summit card, try to get a visa. You won't get the zero interest for 12 months, but you will build your credit, and you can shop anywhere.
Click to expand...

As far as collateral goes, I have my Mustang and a Thunderbird both in my name and they're both paid off. Didn't take out a loan on them, just paid cash. Would that help as far as an interest rate?

1105--I'll think about it, but I'm gonna have to lean towards a no. I'm willing to try almost anything myself, except heads/headers cause I'd rather pay someone a bunch of money to do it right than screw my car up by my own accord and have to pay even more. But hey, I asked for suggestions right...lol.
 

5.0 from 95

Founding Member
Nov 6, 2001
738
0
0
Emory, TX
Mar 29, 2004
#12
  • Mar 29, 2004
  • #12
Having something to back your loan up will save you about 2% points. Having a great co-signer is great for getting the loan because the bank feels better about getting their money back, but it doesn't help with interest. Go put the money in the bank and get a loan against it. That will let you do it by yourself and at the best interest rate for your situation. And don't forget, there is a bank on every corner so make them work for you, not you for them. One last thing, most banks do not report to a credit agency so you need to get the visa if any way possible, they report every month wether you pay good or bad or at all.


Paul
 

Black95GTS

Active Member
Jan 8, 2004
1,644
3
38
Marlborough, MA
Mar 29, 2004
#13
  • Mar 29, 2004
  • #13
cat back is a must, along with stall, shift, and a 65mm TB.... you might also look to do some cosmetic things too, i.e. white face guages, shift knob, e-brake knob, a classy tach on the dash, maybe some a-pillar guages, or take out the silly clock pod and put some guages there. Those are the little things that I always put off for speed type parts and always wish I kinda did because it definately personalizes the car more. Plus when your cruisin top down in the vert everyone can see all the pretty goodies... just a thought, good luck!
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Mar 29, 2004
#14
  • Mar 29, 2004
  • #14
with your automatic... a roots blower

kenne belle
 

VIPERn94Five-0

Founding Member
Apr 28, 2002
3,352
2
58
Poughkeepsie, NY
Mar 29, 2004
#15
  • Mar 29, 2004
  • #15
95snoozer said:
with your automatic... a roots blower

kenne belle
Click to expand...
that would be a twin screw blower....not a roots blower....


Anthony
 
B

baglock1

The Bartender
Founding Member
Aug 25, 2001
6,612
1
78
Space Coast, FL
Mar 29, 2004
#16
  • Mar 29, 2004
  • #16
Just some life experience talking here, but don't take out a loan to upgrade the car. Save up and spend your own money.
 

swingline

New Member
Sep 18, 2003
1,252
0
0
TCB - Taking Care of Business
Mar 29, 2004
#17
  • Mar 29, 2004
  • #17
DO NOT TAKE OUT A LOAN FOR CAR PARTS! Today a customer's car was repoed because of that. Get a credit card with a low limit and buy gas and cheap parts with it. Then at the end of the month you can just write a check for the payoff amount. Trust me, you'll be much happier.
 

Rootus

Officially Addicted
Feb 8, 2003
6,659
1
0
Portland, Oregon
Mar 29, 2004
#18
  • Mar 29, 2004
  • #18
I have a rule, and that rule is that no car toys get bought on credit, period. I can either afford to do it with cash on hand, or I can't afford it at all. It's folly to get into debt buying stuff that loses all of its value the instant you install it.

Dave
 
Y

yellow1995Cobra

New Member
Dec 23, 2002
2,959
2
0
Massachusetts
Mar 29, 2004
#19
  • Mar 29, 2004
  • #19
I agree with what dave said.

Just get a CC to build credit, just be responsible and you will be fine.

But, if you are gonna get the 2k, i would get heads and cam. Thats the hardest thing to install, and once its outa the way everything else will be easy.
 

jermy82

Founding Member
Feb 2, 2002
446
0
0
Sherman, Illinois
Mar 29, 2004
#20
  • Mar 29, 2004
  • #20
I truly appreciate the concern over not taking out a loan or putting car parts on credit. You're all right, and I know it. This really isn't a matter of going in to debt. If I only take out a loan for the things mentioned in my last post, I could pay for it just the same with cash tomorrow if I had to. My only objective is to build credit cause I know it's not gonna be a problem at all to pay it back. I like the idea of doing the credit card, and I probably will here before too long. 5.0 to 95--what exactly do you mean exactly by putting the money in the bank and taking a loan out against it?

Other than that I'll go with the before mentioned mods I think. Cosmetic can be put on hold. I just wanted my Cobra wheels and I'm pretty happy with how it looks. Anything else to add, let me know. Thanks.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
917
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
306
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
282
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
197
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
734
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?