• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

If you run nitrous please come in

  • Thread starter Thread starter White94GT
  • Start date Start date May 27, 2005

White94GT

Member
Dec 1, 2003
59
0
6
St. Louis, MO
May 27, 2005
#1
  • May 27, 2005
  • #1
I am installing a nitrous express wet kit on my car, and was wondering what the best way to run the main nitrous feed line from the bottle in the trunk to the engine compartment on our cars? thanks in advance
 

slvrbullit302

New Member
Jan 6, 2004
986
1
0
Alabama
May 27, 2005
#2
  • May 27, 2005
  • #2
I ran my first kit thru a grommet in the trunk floor that is under the carpet next to either shock tower, from there it went into the rear subframe rail and dropped out a hole in it. Then I strapped it to the fuel lines on the passenger side and ran the line up to where the fuel lines come out into the engine bay.

On the kit I have now I went a different route that required some hole drilling in the door jamb and under the passenger inner fender cover. I will send some pics to ya if ya PM me your email.
 

Stangfreak95

add a 4
Founding Member
Nov 4, 2002
3,571
0
0
In your sister. If none, your mom
May 27, 2005
#3
  • May 27, 2005
  • #3
I got mine INSIDE the car, not under the car. Runs all the way near the passenger kick foot panel (had to drill a hole there through the firewall) under the plastic door side covers, and to the trunk.
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
May 27, 2005
#4
  • May 27, 2005
  • #4
I didn't drill any holes... and it runs under the carpet. It's tucked in under the plastic side panels in the back seat (so no one is sitting on the line) then it runs right under the carpet between the door and seat, up under the pedal area, and through a grommet in the firewall. Been that way for 4 or 5 years now. No problems.

I did use self tapping screws for the bottle mounts.
 

94gts

Member
Jul 4, 2004
873
0
16
Carmel, New York
May 27, 2005
#5
  • May 27, 2005
  • #5
i didnt drill any holes either. mine also goes under the plastic in rear seat area, under the carpet where underneath the passenger seat i remover a grommet in the floor and put the line through there(i siliconed around the line). then, it goes up under the inner fender whereit meets my solenoids neaar the air intake.
 
You must log in or register to reply here.

Similar threads

Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
981
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
S
Brakes 80 Mustang 4.2 rear chassis brake line for 5 lug conversion!
  • StangPowerLSX510
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
185
Fox 5.0 Mustang Tech Aug 9, 2026
limp
W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
295
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
184
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
3
Electrical Starter solenoid out of space?
  • 387lx
  • Jan 22, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
520
Fox 5.0 Mustang Tech Jan 23, 2026
387lx
3
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?