Ignition Problem: Please Help!

Im having a problem with my 1995 gt. I took my coil wire off my distributer cap (held it close to see if it was sending any spark) and it is not sending any spark, as a result of this my car will not work. i replaced the ignition module under my cold air intake pipe thinking that that was the problem but it wasnt.

I would like to mention that i have a Mallory HiFire VII Digital ignition box and an original coil. The ignition box is mounted on my firewall above the power steering unit.

i believe that the problem is located somewhere between my ignition box and my coil. my question are; if the coil was dead, wouldnt it still show a voltage reading? or would it read as if it were dead? Also, how would i check to see if my ignition box were dead? I really hope that is not the case because it was pretty expensive... if anyone out there can help me it would be greatly appreciated.

Thanks in advance
-Fawcett

1995 Gt, FRPP 340bhp 302, e cam, trick flow track heat intake, 24lbs, pro m 80, full exhaust, Mallory HiFire Digital Ignition, brembos, DSS Viper T56, blah blah blah

Thanks ill give that a whirl, any more tips out there?

-Fawcett

Nate-
What coil are you using? Just curious cause Ill probably go with what you got. Also, did the Mallory box give your ignition module (under your cai) problems as well? You still use that box right?

-Fawcett