• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2014 Specific V6 Tech

Im getting wood...TIMBER

  • Thread starter Thread starter LIZARDKING
  • Start date Start date Oct 18, 2005

LIZARDKING

Active Member
Nov 16, 2004
21
14
28
Hell
Oct 18, 2005
#1
  • Oct 18, 2005
  • #1
So, I retired from the military 1 Jun. Ive been taking things easy and relaxing for a few months. I did some consulting work and earned a little scratch to pad the bank account for a rainy day. Our house was rented for 5 years and was in pretty crappy condition when we evicted the renters. So Ive been doing some maintenence and remodleing, working on the landscaping, just catching things up. The misses works a pretty decent job. Moneywise we have been doing pretty good, we have all we need, but we did cut back on the spending since I left the military.

Tomorrow morning I go for my final orientation and physical to start my new job. It pays alot less than what Im accustomed to earning, but its 5 days a week, no weekends, no holidays, and I dont get transfered every 2-3-4 years.

As soon as I get the green light that Im employeed, Im buying my GT bumpers and dual exhaust.

After those mods it will be CAI and tuner, or nothing until a procharger. Ive just got to decide if I want to invest that much.

In my family we tend to keep Mustangs for a long time. My folks had thier 67 for over 25 years, my brother has had a 68 for over 20 years, I had a 88GT for 11 years.

Im feeling wood.
 

scrming

New Member
Aug 9, 2005
476
2
0
Oct 19, 2005
#2
  • Oct 19, 2005
  • #2
Twofocused said:
So, I retired from the military 1 Jun. Ive been taking things easy and relaxing for a few months. I did some consulting work and earned a little scratch to pad the bank account for a rainy day. Our house was rented for 5 years and was in pretty crappy condition when we evicted the renters. So Ive been doing some maintenence and remodleing, working on the landscaping, just catching things up. The misses works a pretty decent job. Moneywise we have been doing pretty good, we have all we need, but we did cut back on the spending since I left the military.

Tomorrow morning I go for my final orientation and physical to start my new job. It pays alot less than what Im accustomed to earning, but its 5 days a week, no weekends, no holidays, and I dont get transfered every 2-3-4 years.

As soon as I get the green light that Im employeed, Im buying my GT bumpers and dual exhaust.

After those mods it will be CAI and tuner, or nothing until a procharger. Ive just got to decide if I want to invest that much.

In my family we tend to keep Mustangs for a long time. My folks had thier 67 for over 25 years, my brother has had a 68 for over 20 years, I had a 88GT for 11 years.

Im feeling wood.
Click to expand...


I thought I was going to hold out for a S/C... but was pretty much choking on the cost... Then these guys in here started talking about how inexpensive the Zex nitrous system was....hmmmmm.... what the heck... so I bought the kit... was very nervous about giving my little car the juice.... then I tried it out! WOW! I'm now hooked! The nice thing is I need absolute no boost driving around town here... If I had the extra power all the time like with a S/C or Turbo.... well, I'll probably loose my license!!! As tempting as it is, I avoid using the N20 on the street... I save it for the track! So it keeps me in check! LOL!
 

Excepcion13

New Member
Sep 16, 2005
215
0
0
Northern Virginia
Oct 19, 2005
#3
  • Oct 19, 2005
  • #3
Do you think that our engines could handle a supercharger or turbo for any length of time without internal work?

"OK, speaking of power adders, heres where we get unhappy with the heads—they are very thin walled aluminum construction, and they have the “Swiss Cheese” deck like the 94-95 3.8 heads that were so prone to blowing head gaskets. Each cylinder is surrounded by 4 head bolt holes and 8, yes 8, large coolant holes! That’s 12 holes! The cylinder deck integrity is very important to preventing blown head gaskets, and the deck integrity has been compromised on the 4.0 SOHC engine because of all the giant coolant ports that Ford put into the head deck. We already know of blown head gaskets and cracked pistons on supercharged 4.0 SOHC’s at only 8 psi." This is from a PDF on our 4.0 SOHC that was linked by JENNS05STANG in another post. The site linked to sells (shocker) headers, valves, etc., but that does not necessarily mean that they are lying about this. However, I do not have the necessary expertise to evaluate this statement. Help? I was thinking about going turbo or SC in a few years (when it is paid off) and hoped I would not have to spend even more money getting my engine ready. Any thoughts?
 

LIZARDKING

Active Member
Nov 16, 2004
21
14
28
Hell
Oct 19, 2005
#4
  • Oct 19, 2005
  • #4
If it blows up, it blows up. Im not worried about it at all. You cant take it with you, so Im useing it up along the way.
 

Excepcion13

New Member
Sep 16, 2005
215
0
0
Northern Virginia
Oct 19, 2005
#5
  • Oct 19, 2005
  • #5
Understood. However, I was just wondering if it would be worth it to reinforce the internals. I wasn't sure if the authors of the review were looking to sell headers, valves, and cams, or if they had a point about an inherent weakness in the 4.0L. I guess we will have to wait and see... Personally, I would rather NOT explode anthing just yet!!! But that procharger kit DOES look nice...
 
S

shooterm1

New Member
Jul 18, 2005
540
1
0
Milford, Pennsylvania USA
Oct 19, 2005
#6
  • Oct 19, 2005
  • #6
Excepcion13 said:
I was just wondering if it would be worth it to reinforce the internals. I wasn't sure if the authors of the review were looking to sell headers, valves, and cams, or if they had a point about an inherent weakness in the 4.0L. I guess we will have to wait and see... Personally, I would rather NOT explode anthing just yet!!! But that procharger kit DOES look nice...
Click to expand...


The one for-sure 1st thing that you'll have to do if you add boost is to up-grade the Head Gaskets (the stock ones are pretty flimsy I'm told)

Otherwise, like he said - I'd just run it until something broke and THEN do the internal upgrades ...
 

scrming

New Member
Aug 9, 2005
476
2
0
Oct 19, 2005
#7
  • Oct 19, 2005
  • #7
Excepcion13 said:
Do you think that our engines could handle a supercharger or turbo for any length of time without internal work?

"OK, speaking of power adders, heres where we get unhappy with the heads—they are very thin walled aluminum construction, and they have the “Swiss Cheese” deck like the 94-95 3.8 heads that were so prone to blowing head gaskets. Each cylinder is surrounded by 4 head bolt holes and 8, yes 8, large coolant holes! That’s 12 holes! The cylinder deck integrity is very important to preventing blown head gaskets, and the deck integrity has been compromised on the 4.0 SOHC engine because of all the giant coolant ports that Ford put into the head deck. We already know of blown head gaskets and cracked pistons on supercharged 4.0 SOHC’s at only 8 psi." This is from a PDF on our 4.0 SOHC that was linked by JENNS05STANG in another post. The site linked to sells (shocker) headers, valves, etc., but that does not necessarily mean that they are lying about this. However, I do not have the necessary expertise to evaluate this statement. Help? I was thinking about going turbo or SC in a few years (when it is paid off) and hoped I would not have to spend even more money getting my engine ready. Any thoughts?
Click to expand...

The thing is there is a lot of 4.0 rangers and explorers run S/C units.. I showed that article to some on trust... his take was that a lot of the article was based on "old school" thinking and that a lot of things have changed... get with the times... LOL
 

scrming

New Member
Aug 9, 2005
476
2
0
Oct 19, 2005
#8
  • Oct 19, 2005
  • #8
Excepcion13 said:
Understood. However, I was just wondering if it would be worth it to reinforce the internals. I wasn't sure if the authors of the review were looking to sell headers, valves, and cams, or if they had a point about an inherent weakness in the 4.0L. I guess we will have to wait and see... Personally, I would rather NOT explode anthing just yet!!! But that procharger kit DOES look nice...
Click to expand...

I know Explorer Express is coming out with a Eaton unit... now that will be nice... 70% of boost at 1800RPM!!! WOOHOO!!! LOL!
 
You must log in or register to reply here.

Similar threads

T
  • Locked
Digital Tuning A9l issue or something else
  • Tufgriz
  • Sep 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
267
Fox 5.0 Mustang Tech Sep 11, 2025
Noobz347
T
Fuel Looking for a little guidance
  • Tufgriz
  • Sep 11, 2025
  • Fox 5.0 Mustang Tech
Replies
9
Views
316
Fox 5.0 Mustang Tech Sep 12, 2025
Noobz347
D
96 get convertible-sell or part out?
  • DTCstang
  • May 17, 2026
  • What is it Worth?!?!?
Replies
5
Views
92
What is it Worth?!?!? May 18, 2026
nickyb
M
Inheriting (and likely restoration of) a 1965 Mustang
  • miniwheats235
  • Feb 17, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
228
1965 - 1973 Classic Mustangs -General/Talk- Feb 19, 2026
Realmongo
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
144
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2014 Specific V6 Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?