• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Importing Classics to Oz

  • Thread starter Thread starter gzminiz
  • Start date Start date Jul 3, 2006
G

gzminiz

New Member
Oct 15, 2004
200
0
0
Phoenix, AZ
Jul 3, 2006
#1
  • Jul 3, 2006
  • #1
This is probably the wrong area but i have seen a couple people from Oz on here. Anyways, I am moving to Melbourne and have recently purchased a 67 coupe. I am in the process of converting it to a v8. I am wondering what the importation laws are in regards to classics. Also, wondering if it would be better to cut my loses here and try to pick one up once I make it there. I am mainly concerned about the general parts availability and of course shipping cost. I was planning on just getting a container and stuffing the car in there with the general household stuff.

Thanks
GZ
 
H

hurt

Member
Apr 1, 2005
173
0
16
San Antonio, TX
Jul 3, 2006
#2
  • Jul 3, 2006
  • #2
Try contacting this company Wallenius Lines E-Mail: info@walleniuslines.com

They co-own American Auto Logistics, the company that transports vehicles world-wide for the US military. I couldn't find a direct contact number for AAL, but the parent company may be able to help you out.
 
G

gzminiz

New Member
Oct 15, 2004
200
0
0
Phoenix, AZ
Jul 3, 2006
#3
  • Jul 3, 2006
  • #3
the biggest isn't the shipping cost, i already have to get a container for my furniture and crap. My concern is if I have to convert it to RH drive, what parts they have and cost, etc. as it site right now all the car is a shell. Has anyone imported/moved from to Oz and taken a classic mustang? Hell, if anyone has justp lain moved their and taken their stuff I would love to ask a couple questions.
 
C

C0V3R

Member
Feb 14, 2003
524
0
16
Australia
Jul 3, 2006
#4
  • Jul 3, 2006
  • #4
Its easy enough to import them into Oz and not that expensive. If its a good car, keep it. If its a rust bucket, sell it and buy another good finished one in the US. My advice is buy all your parts (engine/gearbox/etc) for the car now and put as many into it as you can so you dont get hit with higher local prices, shipping and taxes. Buying parts in the US is ALOT cheaper than in Aus.
 

Route666

Active Member
Aug 16, 2003
1,652
6
39
Brisbane, Australia
Jul 4, 2006
#5
  • Jul 4, 2006
  • #5
And you don't have to convert it to RHD.

Make sure the car is clean - especially the undercarriage - otherwise customs will clean it (to minimise any plants, etc that might be brought in) and charge you for it.
 

ozstang65

Founding Member
Jul 13, 2002
313
0
0
Queensland, Australia
Jul 4, 2006
#6
  • Jul 4, 2006
  • #6
gzminiz said:
...I am moving to Melbourne and have recently purchased a 67 coupe. I am in the process of converting it to a v8. I am wondering what the importation laws are in regards to classics. ..
GZ
Click to expand...

If you want to use it as a daily driver you're probably better off converting to RHD, but as 666 said, it's not mandatory.

There are lots of reputable converters over here, just do your homework first and get involved in one of the local mustang clubs - they'll know. Conversions are 2.5K$ upwards for a decent job.

Parts for the basic RHD conversion are available from local Falcons so don't get too hung up on getting suspension parts in the US first. RRS is a good bet if you want local suspension anyway.

Pick up all the trim, badges and interior before you leave. Engine bits may be cheaper also.

As far as regulations go, the car must meet the emissions standards set out for its manufacture date. In Queensland, we must have retractable lap/sash seatbelts fitted in all 4 corners for daily use. Historical rego (available for less then $200/yr) is available if the car is to be used only for club events. All you need is to get a letter from an accredited car club and you can use your vehicle for any club event and going to/from any club event. You can leave the car LHD for this.
 

Route666

Active Member
Aug 16, 2003
1,652
6
39
Brisbane, Australia
Jul 5, 2006
#7
  • Jul 5, 2006
  • #7
Here's a little hint on the frustration to expect: I have the Australian Design Rules, and for cars BUILT in 1968 and earlier (note this can include some 69s) that basically no rules apply to the car bar the 3-point seat-belts.

However because they're Australia-wide design "rules", you'll find every state will be different on what the car has to have, and the design rules are the absolute minimum guideline for a state to follow.

You're going to find you'll probably have to use amber bulbs in your reverse lamps and parkers as indicators, so you'll find ****ling little things like that to tweak to get on the road.

I guess in the scheme of moving countries, those things are fairly trivial, just annoying for a local enthusiast.

EDIT: The above blanked out word was n-i-g-g-l-i-n-g - not another harsh word.
 
You must log in or register to reply here.

Similar threads

Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
334
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
427
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
F
Electrical Pink/Black Wire Specifically
  • FiveO_H.O(e?)
  • Apr 10, 2024
  • Fox 5.0 Mustang Tech
Replies
4
Views
2K
Fox 5.0 Mustang Tech Apr 23, 2024
AeroCoupe
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?