In Middle of replaceing HEAD GASKET, Quick question?

88GTMustang

New Member

Oct 31, 2003

247

0

0

LA california

May 2, 2004

#1

• May 2, 2004

• #1

Ive got every totally apart and I am trying to clean all the old crap off from the block, is it bad if the old gasket crap gets down in all the little holes for the coolant?? and is there a way too block it from falling in there? or can it be flushed out after all clean? not worried about the pistons as i can just vaccume them out
What do you guys do?

 

Stang8URMPRT

Active Member

Dec 28, 2003

1,100

1

38

Daytona Beach, FL

May 2, 2004

#2

• May 2, 2004

• #2

Yeah, I don't consider it a big deal. I would just flush the system when you get done to get it all out. If you want to keep it out, shove some tore up napkins in there, but not too far that you can't get them out.

Nick

 

ECU5.0

Banned

Jan 10, 2004

1,803

1

0

raleigh, nc

May 2, 2004

#3

• May 2, 2004

• #3

you might be able to vacuum them out also if the vacuum is strong enough. i dont know

 

M

Matts89LX5.0

Founding Member

Nov 1, 2002

1,314

0

36

Long Island, NY

May 2, 2004

#4

• May 2, 2004

• #4

ECU5.0 said:

you might be able to vacuum them out also if the vacuum is strong enough. i dont know

Click to expand...

Use a good vaccuum to get the pieces out.

Matt

 

88GTMustang

New Member

Oct 31, 2003

247

0

0

LA california

May 2, 2004

#5

• May 2, 2004

• #5

how far do those holes go down?? can i rinse it out with water?where would it drain out (i dont want to flush it thru my whole radiator system after i get it all back together)

 

IndyBlk5.0

New Member

Nov 24, 2003

1,122

1

0

New Whiteland, IN

May 2, 2004

#6

• May 2, 2004

• #6

when i did mine i used a wet/dry vac and did quick pulls on the water jacket passages, it got all of the metal shavings out with minimal water being sucked up.