• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

INJECTION CONNECTION DALE CHERRY!!

  • Thread starter Thread starter 01GTCONVERT01
  • Start date Start date Mar 3, 2009
0

01GTCONVERT01

New Member
Jun 14, 2006
16
0
0
Doylestown, PA
Mar 3, 2009
#1
  • Mar 3, 2009
  • #1
BEWARE MUSTANG AND OTHER CAR PPL!! DO NOT SEND YOUR CAR TO THIS GUY, HE DOES NOT KNOW WHAT HE IS DOING, AND WILL NOT ADMIT THAT HE WAS WRONG AND ITS VERY OBVIOUS AND GAVE ME THE COLD SHOULDER AFTER I GAVE HIM $8000!!!

July 08 - Drop off my car to have a blower put on it that i had gotten from a buddy off of a 2003 saleen mustang (saleen blower). DALE told me i would have the car back in two weeks and running good. and the original quote was $1500 out the door tuned and everything.

August 08 - No car yet, DALE fries the computer in the car and blames me for it and bills me $500 for a USED computer from his "friend" dont ask me how he fried it but he managed to do it

Sept 08 - No car still

Oct 08 - No car still

Late November 08 - Get the car back AFTER PAYING A "NEW" PRICE OF $6500!!! HAD TO PAY IT TO GET THE CAR BACK. it was making 330rwhp and 370tq. I HAD THE CAR FOR 5 (FIVE) HOURS!!!! BEFORE THE CAR DIED IN THE MIDDLE OF AN INTERSECTION AND WOULD START AGAIN. I TAKE THE CAR BACK DOWN THERE THE SAME DAY I PICKED IT UP AND all the mechanics came out and listened to the car, sounded for sure valvetrain problem. BUT ALL THE MECHANICS WERE SAYING "IT SOUNDS LIKE BOTTOM END, ITS BOTTOM END!!!" WELL IT WASN'T. --> STUPID IDIOTS! ANYWAY THEY CHARGED ME ANOTHER $1200 TO FIX THE HEAD AND HAVE A STOCK VALVE PUT BACK IN IT (STOCK VALVE IS LIKE 10 BUCKS WTF?). DALE said that he wanted to hold on to it for a few days to make sure it didnt happen again. which it didnt, RIGHT AWAY.

December 08 - Once again get the car back after putting $7700 in it. HAD IT OUT FOR ALITTLE, ABOUT SIX HOURS AFTER PICKING IT UP FROM THE INJECTION CONNECTION, THE CAR THREW A ROD OUT OF THE BLOCK.

DALE SAID IT HAPPENED BECAUSE MY MUSIC WAS TOO LOUD, WELL DALE I DONT THINK THE STEREO HAS ANYTHING TO DO WITH THE ENGINE BUT WHAT EVER. RIGHT BEFORE THE ROD WENT THE CAR REVED OUT TO NEARLY 7000RPMS! ITS AUTOMATIC SHIFT POINTS WERE SHIFTING AT 5800RPMS WHEN HE GOT THE CAR, AND WHEN I GOT IT BACK THE CAR IS SHIFTING AT 6800RPMS!! NEVER DID I TELL HIM TO REMOVE OR CHANGE THE LIMITER NOR THE TRANSMISSION SHIFT POINTS. I TOLD HIM THIS AND HE DENIED EVERYTHING!!!! THE DYNO SHEET THAT I LEFT IN THE CAR SHOWED THE CAR GOING OUT TO 6500 AND HE STILL DENIED IT UNTIL I RUBBED THAT IN HIS FACE.

THE WHOLE TIME HE WAS TALKING OVER ME AND PERSONABLE AT ALL. VERY RUDE AND A COMPLETE JACKASS DODGING BULLETS.

THE END - NOW I HAVE A BROKEN CAR AND IM OUT ALMOST 8 GRAND, BECAUSE DALE CHERRY DOES NOT KNOW WHAT HE IS DOING, DO NOT TAKE YOUR CARS THERE. HE IS A HACK AND A HALF!!!
 
0

01GTCONVERT01

New Member
Jun 14, 2006
16
0
0
Doylestown, PA
Mar 3, 2009
#2
  • Mar 3, 2009
  • #2
oh ya and the dyno sheet that i showed him and left in the car suddenly disappeared from the car and no longer can be found and he gave me a different one that did not have the car reving out that high.

covering his tracks -->jackass that doesnt deserve to work on a golf cart!!
 

ThePumpkin

New Member
Jan 26, 2009
55
0
0
Missouri
Mar 3, 2009
#3
  • Mar 3, 2009
  • #3
Sheesh.

amnit: crapola:damnit::fairyfight:



 

Blackone51

Member
Oct 30, 2008
201
2
16
Mar 3, 2009
#4
  • Mar 3, 2009
  • #4
This is why I do my own car work!!! If I don't know how, I learn how!!!
 
D

darkside03gt

Member
Feb 19, 2007
851
8
18
Sacramento CA
Mar 3, 2009
#5
  • Mar 3, 2009
  • #5
No offense dude but WHY did you take your car to this guy? How the hell did the install cost that much to begin with? Why did you keep taking it back to him?

Why is it (being general not pointing at the OP) all these people lately are having so many problems with shop after shop?
 

RedDaemon

10 Year Member
Mar 31, 2005
3,470
9
108
Atlanta, GA
Mar 3, 2009
#6
  • Mar 3, 2009
  • #6
knowledge/information > *

if you dont know whats going on or what to expect, you have nothing to gauge. this is why research is so important.


Blackone51 said:
This is why I do my own car work!!! If I don't know how, I learn how!!!
Click to expand...

right on.
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Mar 3, 2009
#7
  • Mar 3, 2009
  • #7
Your first mistake was not taking legal action when he charged you $5,000 more than the origional quoted price.

Your second mistake was not getting your car, leaving, and taking it to a competent shop. He CANNOT hold your car from you and demand X amount of dollars so you can "get it back". Your vehicle was NOT impounded, and he did NOT notify you that he was going to charge you $5,000 more than the origional price.

You may not have a pot to piss in now from a legal standpoint because of the time period that has passed before you would have taken action against this asshat.

If this is all true, that guy is an F-n retard... Loud music causing a rod to blow out of the block is QUITE POSSIBLY the most rediculous thing I have EVER heard in the automotive world.
 

Notchbck93

New Member
Dec 9, 2003
422
1
0
IL
Mar 3, 2009
#8
  • Mar 3, 2009
  • #8
Wait, as a business professional and a Master Tech, L1, how was it that you paid 6500 in additional costs just to get your car back?

Did you not sign a contract of limitations before dropping your car off?

Did you sign a waiver of liability?

If people are paying other people 1500 dollars to install blowers, my garage door is open.

I have my clients sign a waiver of liability that they understand that I will not be held responsible for the workmanship/quality of the products that they have me install.
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,402
3,548
233
Mar 3, 2009
#9
  • Mar 3, 2009
  • #9
Aw man, that really really sux. I am sorry to hear that. I am having shop troubles right now too but they are being really good and taking care of everything. As for mechanical work, I too do my own after shops such as the one you talk about. About the only things I cant do on mine is the rear gear, trans internals and block internals. Everything else I can handle.
You can still take him to court and win I am sure. At least get the $5000 over charge back. Most judges will side in your favor IMO
 

ThePumpkin

New Member
Jan 26, 2009
55
0
0
Missouri
Mar 3, 2009
#10
  • Mar 3, 2009
  • #10
LaserSVT said:
You can still take him to court and win I am sure. At least get the $5000 over charge back. Most judges will side in your favor IMO
Click to expand...

Small claims court, the max is usually 5grand.
That should cover all of the expenses.
Did you have full coverage?
 
You must log in or register to reply here.

Similar threads

Most ridiculous / dishonest work you have heard a shop recommend?
  • SchwarzStock
  • Jul 19, 2026
  • Off-Topic Hangout
Replies
4
Views
151
Off-Topic Hangout Jul 20, 2026
SchwarzStock
I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
187
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
S
Need help and Advise - 89 Problem Child
  • Sheela
  • Oct 28, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
212
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2025
evintho
J
Help - SCT Woes
  • James banks
  • Jan 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
523
1996 - 2004 SN95 Mustang -General/Talk- Feb 2, 2026
squeak93
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
19
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Monday at 10:08 AM
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?