• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

injector and intake questions

  • Thread starter Thread starter 95stangGT
  • Start date Start date Dec 30, 2003
9

95stangGT

Founding Member
Jan 13, 2002
513
0
0
Buffalo, NY
Dec 30, 2003
#1
  • Dec 30, 2003
  • #1
Well over the winter, my only mods to the car were gonna be a 5-speed swap, 3.73 gears, underdrive pulleys, CAI, and MAC long tubes w/ a prochamber. But now I was talking to a fellow mustang guy whose going carbed and he said he will sell his systemax II intake, 30 lb injectors, and a mass air meter calibrated to them for pretty cheap. All this is off a fox body though. So my questions are, with the properly calibrated mass air, would the injectors be fine on my car for now until I get more mods done. Or would they just dump to much fuel in? I would think the mass air would shorten the pulses and thus gas mileage would stay the same as with 19 lb. Then with the intake, would I just need the elbow to bolt it on? Would this intake be a worth while investment to put on if I can get it cheap enough? Thanks for any help
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Dec 30, 2003
#2
  • Dec 30, 2003
  • #2
All those parts are too big for stock heads. The 30lb injectors are WAY too big, even with a calibrated MAF. If you did run it, you'd HAVE to have an adjustanble FPR. The holley is a good intake, but it is WAY too big for stock heads... you'd hate the way the car ran with it on if you kept the stock heads. You would need an intake elbow unless you buy a fox body T-body and do the swap to it.

If the guy is interested in selling them to someone not local... I might be interested in them. I'm not telling you they are too big for you to talk you out of them, but I could use them on my '90GT I'm building up right now. email me at killercanary@hotmail.com if he or you are insterested.
-Paul
 
You must log in or register to reply here.

Similar threads

7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
455
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
8
Fox Mass Air Flow 42lb injectors
  • 89wreck
  • Aug 18, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
765
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 5, 2025
Scrapla347
D
Fuel pump upgrade
  • dkrupp79
  • Jul 7, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
229
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 10, 2025
Scrapla347
Pro flow serial number
  • Andresquintana.mma
  • Mar 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
496
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 19, 2025
Andresquintana.mma
Gt40 e303 combo questions
  • 99mustanggt2018
  • Mar 30, 2025
  • 1994 - 1995 Specific Tech
Replies
2
Views
412
1994 - 1995 Specific Tech Mar 30, 2025
KRUISR
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?