Fuel Injectors for my fox with Terminator X. EV1 or EV6?

I'm doing a Terminator X with an On3 turbo kit in my Foxbody (intake manifold is an original Performer RPM). I have the 550-937 kit (not the 937F) and I'm a bit lost on which injectors to get. It seems there are either EV1 or EV6 injectors (I think the Terminator X comes with EV1 plugs), and I know you can get plug adapters if needed, but I seem to recall the body or reach was a little different between EV1 and EV6 injectors. LMR shows both for the 86-93 years, so I'm a bit unsure. I'm planning to go with 47lb injectors, but want to make sure they will fit my intake/fuel rail.

SO, is there a physical difference between EV1 or EV6 injectors?

Thanks

(picture, cuz why not)

AeroCoupe said:

EV6 are about the same height at the EV1 (stock style for the Fox Mustangs). EV6 are skinnier and have a different injector connector that is water proof/resistant. When you order the Terminator X you have to select which injector style you are running and it will come with the correct connectors.

Click to expand...

OK, that helps. I have EV1 connectors, but wasn't sure about the physical difference (other than the plug)

Thanks