• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Injectors staying open>?

  • Thread starter Thread starter craigwhite89gt
  • Start date Start date Feb 18, 2006

craigwhite89gt

New Member
Oct 26, 2003
181
0
0
Cecil County Maryland
Feb 18, 2006
#1
  • Feb 18, 2006
  • #1
Ok now i had 30# inj on the car now i decided to put my 24s back on, start the car up and its spwein white smoke from too much gas. I had 15 dollars in gas in it and its almost gone already from sitting... I took the car up the street at Wide Open throttle its great. but at lower rpms it smokes and doesnt have all that much power.... WTF is goin on im bettin tired of this ****
 

Hickfied

Member
Nov 9, 2005
413
0
16
Morganton, NC
Feb 18, 2006
#2
  • Feb 18, 2006
  • #2
You did put the right mass air equipment on for the new injectors didn't you?
 

craigwhite89gt

New Member
Oct 26, 2003
181
0
0
Cecil County Maryland
Feb 18, 2006
#3
  • Feb 18, 2006
  • #3
Yup i had the 24s on my other motor... with the mass air sensor...
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 18, 2006
#4
  • Feb 18, 2006
  • #4
Dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/detailedproductdescription.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $35.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Feb 18, 2006
#5
  • Feb 18, 2006
  • #5
craigwhite89gt said:
Yup i had the 24s on my other motor... with the mass air sensor...
Click to expand...


but did you put a meter recal for 30#??
 
You must log in or register to reply here.

Similar threads

2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
469
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
598
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
L
Engine 85 GT Excessive Idle
  • lutzkecj
  • Sep 18, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
375
Fox 5.0 Mustang Tech Sep 21, 2026
86HO5.0
8
S
Progress Thread Hello from Nashua, NH
  • sevenup
  • Oct 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
198
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2026
sevenup
S
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?