installation of MAC OFF-ROAD H

[dsg_gt2004]

well i just got all my parts...but i need to get step by step instructions...
i have
1- steeda mils
1-bbk O2 extenstions
1- midpipe

if noone can provide instructions(mac didnt supply any), i need to know which O2's to use my Mils on; is it the back o2s?

thanks
by the way my car is a 2004

 

[95CobraStang]

the back one's...the ones that would be after the cats

 

[dsg_gt2004]

im guessing the extensions are for the back also?

thanks by the way 95cobrastang

 

[95CobraStang]

oh yeah, the extensions would probably go to the fronts...i just extended mine, myself. My problem o2 sensor was the driver's side front one. The back ones, you'll probably just pop the clip off of the body. Youll know what im talking about, when you see it.

 

[dsg_gt2004]

well i must say i appreciate the info...i do believe im ready to slap that bad boy on once i get some time...i gotta find a way to get some sound clips of it

 

[95CobraStang]

i better cover my a$$ on that last bit of info...i put on an o/r x pipe, not h-pipe....so, i retract my last post

 

[dsg_gt2004]

ha..im pretty sure that an h and x only have one difference being the shape at the end..i may be wrong..but im sure the info you told me will help me in my install

 

[04DarkShadowGT]

No install differences between and X and H just the crossover is different.

I have the mac H too, waiting for the install after I get my house and have a garage to use.

 

[CManT1914]

You might wanna soak all your bolts with some liquid wrench before trying to undo them. If they're to tight they can shear off. It shouldn't be a big deal since your car is brand new, but better safe than sorry. You can get liquid wrench at O'Reilly's.

 

[Back2Mustangs]

dsg gt2004, that pipe come with a new gasket from Mac for the passenger manifold flange?

 

[DarkFireGT]

Are extenders necessary? i bought the h-pipe and haven't had a chance to put it on. I know my chk engn light will come on after some time without the eliminators, but do I need the extensions?

 

[04DarkShadowGT]

only 2004 models need extension

 

[1low03gt]

When installed the mac off road h pipe,i reused the factory flange gasket on the passenger side,not the piece of sh@t gasket that comes with the h pipe.No problems there.
Didn't need extensions for my O2's,just sleed them off there mointing point off the trans cross member,then zippied tied them after i installed the MIL eliminators.
Mine is an '03 though.Don't know if that differ's that much from the '04's .
But know i have cat's welded in place ...emissions !!!

 

[dsg_gt2004]

You might wanna soak all your bolts with some liquid wrench before trying to undo them. If they're to tight they can shear off. It shouldn't be a big deal since your car is brand new, but better safe than sorry. You can get liquid wrench at O'Reilly's.

ha..thanks..i ended up getting some pb blaster which i heard works pretty well...i rather be safe than sorry...to answer someone elses question...you only need extensions if you have an 04 due to the cat placement or something like that

thanks all to who replied

 

[dsg_gt2004]

dsg gt2004, that pipe come with a new gasket from Mac for the passenger manifold flange?

actually i didnt get anything except three pieces(two pipes that from the headers and the one crossover with the H)...i didnt get a gasket nor instructions..but it could be b/c i ordered from crmotorsports(third party)...o well the mac gasket sucks anyways, im just gonna reuse my factory gasket