Well after sitting in the garage for over 5 years i finally got around to installing the SFC i made.
all i need to do is make the seat braces. Hopefully this next few weekends i will have my TQ boxes in and drive line loop and the rear anti roll bar i made also!peace
john
all i need to do is make the seat braces. Hopefully this next few weekends i will have my TQ boxes in and drive line loop and the rear anti roll bar i made also!peace
john
Cobra912
Active Member
MAC'n89Blckstng
Active Member
lokks good but dude use some jack stands before you kill yourself!
I don't think those peices of wood are gonna give out! lol
Don't ya wish ya put those things in a long time ago? I couldn't believe the difference in my 89 when I put them on that car!
yeah those solid oak logs arent gonna colapse with 3000LBS on it. Ibet those things weight 50LBS each! peace
john
john
I don't think those peices of wood are gonna give out! lol
Don't ya wish ya put those things in a long time ago? I couldn't believe the difference in my 89 when I put them on that car!
Well yes! I made them for old 95 i had. then sold it for my 93SSP witch already had them. So this car didnt and i figured what the hell! Figured i saved myself about $200 plus by making them and installing them! Wish we could put them on on the lift in the background!But good thing for it cause when we do the seat braces,TQ boxes and rear anti roll bar that lift will be golden!peace
john
Reminds me of how I let mine sit in the garage for about 2 years I was glad when I finally got them on though
ive got some subframes wrapped up somewhere that i definitly need to get around to installing...
night and day difference?
night and day difference?
lancec2c30
Member
lokks good but dude use some jack stands before you kill yourself!
You can't install subframe connectors with the car on jack stands. It has to sit on all 4 tires.
Repostyle
Member
You can't install subframe connectors with the car on jack stands. It has to sit on all 4 tires.
Actually, it just has to sit on the suspension. But either way.
lancec2c30
Member
Actually, it just has to sit on the suspension. But either way.
Yeah, you just have to make sure the body of the car isn't pre-loaded.
ive got some subframes wrapped up somewhere that i definitly need to get around to installing...
night and day difference?
oh yeah big diffrence! peace
john
MAC'n89Blckstng
Active Member
Yeah, you just have to make sure the body of the car isn't pre-loaded.
Not really, there's two ways of thinking about it. If you do them on a lift the front end will sag a little and then after they are in it will be strong and rigid cause your front end is now preloaded. I've put on three sets on a lift and never had a problem and the cars come out perfectly fine.
- Jul 21, 2005
- 2,169
- 145
- 155
TorontoGT
Member
Looks good...
Add me to list of "Have them, need to install them"... It's one of the first things I plan on doing once the weather warms up.
Add me to list of "Have them, need to install them"... It's one of the first things I plan on doing once the weather warms up.
lancec2c30
Member
Not really, there's two ways of thinking about it. If you do them on a lift the front end will sag a little and then after they are in it will be strong and rigid cause your front end is now preloaded. I've put on three sets on a lift and never had a problem and the cars come out perfectly fine.
Then I guess it's a matter of opinion, I would install them on a 4 post or ramps.
its been discussed both ways. some people view that if the chassis is twisted a little theyd rather weld it up as it sits, but some want to get it straight then weld them up.
ive had mine on for years and i love them. best mod you can do to a fox for sure
ive had mine on for years and i love them. best mod you can do to a fox for sure
Unless you have access to a lift and tools able to measure that the car is square, you should weld with suspension loaded (the alternative is loading the frame/uni-body. i.e. lift). You otherwise don't know what you're going to end up with until she's down and traveling down the road. "Eye-balling" it is not acceptable to me.
On a regular lift, you have just as much potential to tweak things in the wrong direction as you do in the right direction. Even a small preload in the wrong way can have a negative impact. The extreme examples are those tool-bags you see going down the road in "crab" mode. Makes just wanna spray paint "TehFail" on the driver's door.
I went overboard I suppose. I went to a Ford dealership, they ran it up on teh frame straightener, tured it, and welded my pre-bolted SFCs into place. I was in and out in 20 min. and think it cost me $30.
On a regular lift, you have just as much potential to tweak things in the wrong direction as you do in the right direction. Even a small preload in the wrong way can have a negative impact. The extreme examples are those tool-bags you see going down the road in "crab" mode. Makes just wanna spray paint "TehFail" on the driver's door.
I went overboard I suppose. I went to a Ford dealership, they ran it up on teh frame straightener, tured it, and welded my pre-bolted SFCs into place. I was in and out in 20 min. and think it cost me $30.
- Jul 21, 2005
- 2,169
- 145
- 155
A Ford dealership only charged you $30 to weld on SFC's??
Yeppers... what's the going rate nowadays $70-$90 an hour? Already bolted and took em maybe 15 min to do the actual work.
I don't think they were trying to get rich from running 8 beads of weld. hehe
- Jul 21, 2005
- 2,169
- 145
- 155
Similar threads
- Replies
- 24
- Views
- 1K
- Replies
- 37
- Views
- 1K
- Replies
- 36
- Views
- 1K
- Replies
- 8
- Views
- 468