Installing 87-93 groundeffects/bumpers?

Welcome to the boards.

Your gonna need the GT side mouldings so the ground effects will line up and look right. I love the 4 eye'd stangs but if you must change it to a 87-93 go right ahead. Your gonna need a newer hood from a 87-93 and an aftermarket one will work. It could be done and I dont see it being to hard. Good Luck

easier to just get a stock hood and an 87-93 LX front bumper, put them on and sell the GT Ground effects...you'll make money and the car will weigh less.

There is a bracket system that the top of the side ground effect fit on you have to get that from your ford dealer, they have to be pop rivited on so you have to drill holes in your rocker panels. If I remember right there are 5 bracket plates per side one long two short and 2 that are even shorter. There is also 2 U shaped brackets for the back skirt that bolt onto the bumper. You may have all the effects but you need the mounting hardware to make it fit right Since the holes aren't there it will take alot to line up every thing properly so take your time. good luck