Installing a/c delete bracket.

1Fine89stang · Jan 20, 2007

I just recieved my a/c delete bracket that moves the power steering pump up . My kit came with no directions , does anyone have a diagram or any info on it?

1Fine89stang · Jan 20, 2007

Hey guys , i figured out the bracket and have everything mounted , i also went ahead and got rid of the smog pump while i was in there . Does anyone have any idea what belt size i should get? Also , what do you do with all the hoses that are attatched to the smog pump?

Foxfan88 · Jan 20, 2007

hmm dont know for sure...

my belt with my engine, only with smog delete was a 70.5 inch

just take a string and wrap it around your pullies u have( not the tensioner) and measure it and start from there.

mob · Jan 20, 2007

I did exactly what you did, put the frpp kit in, and take out the smog pump. I ended up using I think a 74.5" belt. I did alot of research and pretty much determined that everyone gets a different belt size. Just buy a few, and return the ones you dont use. I had to make a total of 4 trips in a row to the parts store to find the right belt.

1Fine89stang · Jan 20, 2007

Ive been back to the parts store like 8 times trying to figure this out , right now i have a 71 inch belt on there and i only have like a quarter inch of space between the fan and tensioner , and the 70 inch was waaaaay too small .

1Bad88notch · Jan 20, 2007

you can take some string and wrap it around how the belts goes and measure it and go from there.

Foxfan88 · Jan 20, 2007

i may have thought wrong on the 70.5 inch one lol might have been 75.5 duno i forgot

sorry

but like stated before. just take the string, wrap it around everything except the tensioner. take that measurement and add about 4-5 inches to that to give it some slack for the tensioner.

stangster50 · Jan 20, 2007

Foxfan88 said:
i may have thought wrong on the 70.5 inch one lol might have been 75.5 duno i forgot

sorry

but like stated before. just take the string, wrap it around everything except the tensioner. take that measurement and add about 4-5 inches to that to give it some slack for the tensioner.

4-5 in? thats a lot of slack..

Foxfan88 · Jan 20, 2007

just a guess. u need to give it some so the tensioner can do its job, if u dont give it enough u wouldnt be able to get the tensioner over the belt easily.

DmnStr8 · Jan 21, 2007

With a 3G alt, no smog pump, and the FRPP a/c delete I run a 73.5" belt.

jfran430 · Jan 21, 2007

For those of you who took out the smog pump .. what do you do for emissions? .. just put it back in?

1Fine89stang · Jan 21, 2007

I get stickers from my uncle's friend , or you could just not get caught. lol. Does anyone know what to do with all the hoses that are attatched to the smog pump? There seems to be a lot of them , where can i disconect them from?

Installing a/c delete bracket.

1Fine89stang

New Member

1Fine89stang

New Member

Foxfan88

My Grandpa has great wood.

mob

the guy who hits on his mom

1Fine89stang

New Member

1Bad88notch

New Member

Foxfan88

My Grandpa has great wood.

stangster50

New Member

Foxfan88

My Grandpa has great wood.

DmnStr8

Member

jfran430

New Member

1Fine89stang

New Member

Similar threads

Installing a/c delete bracket.

New Member

New Member

My Grandpa has great wood.

the guy who hits on his mom

New Member

New Member

My Grandpa has great wood.

New Member

My Grandpa has great wood.

Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency