Gotta question about fitting a 4.6 liter sn95 k-member to a fox. I am wanting to drop a 4.6 in my car, but I am uncertain as to the procedure, some people say you have to cut it off in the back and elongate the rear holes, some say the bushings for the lower control arms have to be reversed, some say use the fox lower control arms. I would like to hear the skinny from someone who has actually performed the mod. If it bolts right in after cutting the back down a bit then I’ go for it, I don’t know that the fox body lca’s are the same as the sn95 lca as my fox lca’s look smaller than the 97 gt lca’a.
One more question, does the 97 gt steering rack have the same size fittings as the rag joint on the fox.
One more question, does the 97 gt steering rack have the same size fittings as the rag joint on the fox.