well. i just got in all of my big order
MSD Distributor
MSD Digital 6-plus ignition box
MSD super conductor 8.5mm sparkplug wires
MSD blaster 2 coil
pro-m 75mm mass air w/ cai tuning for 24lb injectors
ford hi-flo 24lb Fuel Injectors
and one gasket for my gt40 upper intake (for the fuel injector install)
(i dont think im forgetting anything).
now... the reason im posting is, im going to most likely do all this in my driveway on my next day off. is there anything i should know that would help me out with the installs? any tips/tricks etc.. any info is appreciated. i know the basics from browsing through the haynes manual
ALSO! i read the instructions for my MSD distributor, it says it has a steel gear on it and should ONLY be used with a billet steel camshaft.. and i bought my car with a ford 'b' cam in there. is that cam billet steel?
also it says put this grease stuff it comes with on the gear before the install. blah blah. thanks for helping me out. i wanna make sure i dont forget anything or goof something up
thanks
derek
MSD Distributor
MSD Digital 6-plus ignition box
MSD super conductor 8.5mm sparkplug wires
MSD blaster 2 coil
pro-m 75mm mass air w/ cai tuning for 24lb injectors
ford hi-flo 24lb Fuel Injectors
and one gasket for my gt40 upper intake (for the fuel injector install)
(i dont think im forgetting anything).
now... the reason im posting is, im going to most likely do all this in my driveway on my next day off. is there anything i should know that would help me out with the installs? any tips/tricks etc.. any info is appreciated. i know the basics from browsing through the haynes manual
ALSO! i read the instructions for my MSD distributor, it says it has a steel gear on it and should ONLY be used with a billet steel camshaft.. and i bought my car with a ford 'b' cam in there. is that cam billet steel?
also it says put this grease stuff it comes with on the gear before the install. blah blah. thanks for helping me out. i wanna make sure i dont forget anything or goof something up
thanks
derek