• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Installing NitrousWorks Wet Kit, have a question...

  • Thread starter Thread starter Aliate X
  • Start date Start date Oct 1, 2005

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Oct 1, 2005
#1
  • Oct 1, 2005
  • #1
Simply, where do I hook up the fuel line going from the fuel solonoid? I have a BBK adjustable fuel press. regulator. I heard you can hook it up to the schredder valve, however you spell it, not sure where that is though. Any help is appriciated.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Oct 1, 2005
#2
  • Oct 1, 2005
  • #2
You hook it to the shrader valve. You have to remove the stock fitting and buy the needed fittings to make it work. I think its 1/16" for the shrader valve and the nitrous line should be 4an. Just be VERY careful tightening those brass fittings, they can snap easily. Use a little thread sealent on the shrader fitting but I don't think the an fitting uses any sealent.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Oct 1, 2005
#3
  • Oct 1, 2005
  • #3
alright thanks a lot man, appriciate the help.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Oct 2, 2005
#4
  • Oct 2, 2005
  • #4
I cant find a damn store that has the fitting I need to hook the fuel line up to the valve. where did you get yours?
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Oct 2, 2005
#5
  • Oct 2, 2005
  • #5
Lowes or home depot should have it in the plumbing section. Just pick up what you need to make it work.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Oct 2, 2005
#6
  • Oct 2, 2005
  • #6
yeah I went there already, they didnt have anything small enough.
 
J

jerryD

Founding Member
Mar 16, 2000
1,061
0
37
Gladstone, MO
Oct 2, 2005
#7
  • Oct 2, 2005
  • #7
hardware stores prob only go to 1/8 fittings. you will have to go to a speed shop in your town or order it from autometer, NX, NOS/Holley, summit, ect.....
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Oct 3, 2005
#8
  • Oct 3, 2005
  • #8
thanks for the help, I found the fitting I needed, it was in the bag with the jets, the guy i bought it from didnt know he had it.
 
You must log in or register to reply here.

Similar threads

L
Engine 85 GT Excessive Idle
  • lutzkecj
  • Sep 18, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
368
Fox 5.0 Mustang Tech Sep 21, 2026
86HO5.0
8
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
236
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
D
After Market fuel rails with Stock fuel lines
  • dropteeth
  • May 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
342
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 2, 2026
2000xp8
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
478
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Fuel Bad regulator diaphragm?
  • JD1964
  • May 20, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
36
Views
2K
Fox 5.0 Mustang Tech Jul 16, 2025
JD1964
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?