• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Instructions for installing Tweecer

  • Thread starter Thread starter DJHA90
  • Start date Start date Sep 24, 2004

DJHA90

Member
Dec 17, 2002
581
0
16
Texas
Sep 24, 2004
#1
  • Sep 24, 2004
  • #1
Got my Tweecer today, but now the site is down. Anybody with instructions on where to find the computer and what to take off in order to get to it. Pictures would be nice.
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Sep 24, 2004
#2
  • Sep 24, 2004
  • #2
Try the Yahoo Tweecer site

Later
Grady
 

DJHA90

Member
Dec 17, 2002
581
0
16
Texas
Sep 24, 2004
#3
  • Sep 24, 2004
  • #3
I tried, couI neededldnt find what
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Sep 24, 2004
#4
  • Sep 24, 2004
  • #4
I dont have pics, but you have to remove the kick panel on the pass side under the glove box. There is a plastic piece that holds in the stock EEC. You have to remove that. When you connect the TwEECer to the J-port, you should put a wedge (I used a door shim) between the cable and the space so it doesnt wobble, then Duct tape it, so that when you manipulate it back in place, it doesnt disconnect from the port. You will see what I am talking about once you take it out. If "I" can do it, ANYONE can, trust me.

RC
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Sep 24, 2004
#5
  • Sep 24, 2004
  • #5
I just saw that the Tweecer site, not the support site, is not down. Maybe you can get some info there.

http://www.tweecer.com/

It has been about two years when I got mine and all I can remember is you have to load two different programs on your laptop. When you get it connected use the bin file from your pcm. You retrieve the data from your pcm with the Read EEC button.

Later
Grady
 

DJHA90

Member
Dec 17, 2002
581
0
16
Texas
Sep 24, 2004
#6
  • Sep 24, 2004
  • #6
What Im really looking for is:

1. Where is the EEC computer located.
2. What do I need to take off to get to it.

Thanks
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Sep 24, 2004
#7
  • Sep 24, 2004
  • #7
DJHA90 said:
What Im really looking for is:

1. Where is the EEC computer located.
2. What do I need to take off to get to it.

Thanks
Click to expand...
ME said:
you have to remove the kick panel on the pass side under the glove box. There is a plastic piece that holds in the stock EEC. You have to remove that.
Click to expand...

Did you read the replies??
Did you research this B4 spending $500+
RC
 

DJHA90

Member
Dec 17, 2002
581
0
16
Texas
Sep 24, 2004
#8
  • Sep 24, 2004
  • #8
94GTLaserRC said:
Did you read the replies??
Did you research this B4 spending $500+
RC
Click to expand...

I didn't see the one reply that had usefull information.

Yes I did research. Not sure what that has to do with asking how to get to the computers on 95 cars and what you have to take off.... I have done searches on multiple boards, and the information was just not there.
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Sep 24, 2004
#9
  • Sep 24, 2004
  • #9
DJHA90 said:
I didn't see the one reply that had usefull information.

Yes I did research. Not sure what that has to do with asking how to get to the computers on 95 cars and what you have to take off.... I have done searches on multiple boards, and the information was just not there.
Click to expand...


FOR THE THIRD TIME, I WILL POST THIS:


ME said:
you have to remove the kick panel on the pass side under the glove box. There is a plastic piece that holds in the stock EEC. You have to remove that.
Click to expand...


If that is as you put it "no reply that had useful information", Im sorry I didnt help you!

RC
 

DJHA90

Member
Dec 17, 2002
581
0
16
Texas
Sep 25, 2004
#10
  • Sep 25, 2004
  • #10
RC,

Reread my post (or read it completely for the 1st time) I said:

"I didn't see the one reply that had usefull information."

This means that I didn't see your post (the one with the useful information) Looks like neither one of us paid enough attention to the other one's post

Thanks for the instructions!!!
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Sep 25, 2004
#11
  • Sep 25, 2004
  • #11
DJHA90 said:
RC,

Reread my post (or read it completely for the 1st time) I said:

"I didn't see the one reply that had usefull information."

This means that I didn't see your post (the one with the useful information) Looks like neither one of us paid enough attention to the other one's post

Thanks for the instructions!!!
Click to expand...

SO.....Did you get to it, or not?

Only problem is it's a bit crammed in that corner!
RC
 
You must log in or register to reply here.

Similar threads

B
Fuel 1990 installing edelBrock intake
  • Beaker
  • Oct 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
316
Fox 5.0 Mustang Tech Oct 6, 2026
Noobz347
L
1996 harmonic balancer crank bolt. Help!
  • Lost in Palm Bay
  • Jul 21, 2026
  • SN95 V6 Mustang Tech
Replies
6
Views
278
SN95 V6 Mustang Tech Jul 24, 2026
Lost in Palm Bay
L
LX Rear Trunk Lid Emblem Install Measurements
  • Habu135
  • Oct 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
17
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2025
Habu135
coil pack bracket
  • SteveG94GT
  • Apr 11, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
167
SN95 V6 Mustang Tech Apr 11, 2026
SteveG94GT
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
248
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?