Instructions for installing Tweecer

[DJHA90]

Got my Tweecer today, but now the site is down. Anybody with instructions on where to find the computer and what to take off in order to get to it. Pictures would be nice.

 

[final5-0]

Try the Yahoo Tweecer site

Later
Grady

 

[DJHA90]

I tried, couI neededldnt find what

 

[94GTLaserRC]

I dont have pics, but you have to remove the kick panel on the pass side under the glove box. There is a plastic piece that holds in the stock EEC. You have to remove that. When you connect the TwEECer to the J-port, you should put a wedge (I used a door shim) between the cable and the space so it doesnt wobble, then Duct tape it, so that when you manipulate it back in place, it doesnt disconnect from the port. You will see what I am talking about once you take it out. If "I" can do it, ANYONE can, trust me.

RC

 

[final5-0]

I just saw that the Tweecer site, not the support site, is not down. Maybe you can get some info there.

http://www.tweecer.com/

It has been about two years when I got mine and all I can remember is you have to load two different programs on your laptop. When you get it connected use the bin file from your pcm. You retrieve the data from your pcm with the Read EEC button.

Later
Grady

 

[DJHA90]

What Im really looking for is:

1. Where is the EEC computer located.
2. What do I need to take off to get to it.

Thanks

 

[94GTLaserRC]

What Im really looking for is:

1. Where is the EEC computer located.
2. What do I need to take off to get to it.

Thanks

you have to remove the kick panel on the pass side under the glove box. There is a plastic piece that holds in the stock EEC. You have to remove that.

Did you read the replies??
Did you research this B4 spending $500+
RC

 

[DJHA90]

Did you read the replies??
Did you research this B4 spending $500+
RC

I didn't see the one reply that had usefull information.

Yes I did research. Not sure what that has to do with asking how to get to the computers on 95 cars and what you have to take off.... I have done searches on multiple boards, and the information was just not there.

 

[94GTLaserRC]

I didn't see the one reply that had usefull information.

Yes I did research. Not sure what that has to do with asking how to get to the computers on 95 cars and what you have to take off.... I have done searches on multiple boards, and the information was just not there.

FOR THE THIRD TIME, I WILL POST THIS:

you have to remove the kick panel on the pass side under the glove box. There is a plastic piece that holds in the stock EEC. You have to remove that.

If that is as you put it "no reply that had useful information", Im sorry I didnt help you!

RC

 

[DJHA90]

RC,

Reread my post (or read it completely for the 1st time) I said:

"I didn't see the one reply that had usefull information."

This means that I didn't see your post (the one with the useful information) Looks like neither one of us paid enough attention to the other one's post

Thanks for the instructions!!!

 

[94GTLaserRC]

RC,

Reread my post (or read it completely for the 1st time) I said:

"I didn't see the one reply that had usefull information."

This means that I didn't see your post (the one with the useful information) Looks like neither one of us paid enough attention to the other one's post

Thanks for the instructions!!!

SO.....Did you get to it, or not?

Only problem is it's a bit crammed in that corner!
RC