• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Intake Help Quick!

  • Thread starter Thread starter BLKNGHT
  • Start date Start date Sep 4, 2005
B

BLKNGHT

New Member
Nov 20, 2004
12
0
0
Sep 4, 2005
#1
  • Sep 4, 2005
  • #1
okay, i just bought a trick flow track heat EFI intake for my 89. installation went smooth, got everything back in place and the car WILL NOT start. its turning over and sputtering a little like its about to start but it wont. its getting fuel, and spark so i dont know what could be wrong. i put the distributor back in and lined everything back up also. can anyone help me?
 
B

buddha

New Member
Jan 30, 2001
13
0
1
Sep 4, 2005
#2
  • Sep 4, 2005
  • #2
Are you sure you put the distributor back in correctly? It's easy to flub, no matter how many times you've done it. Bring the number 1 back to TDC on the compression stroke and check to make sure you've got it right.
 

Black 93 Fox

Active Member
Jun 1, 2003
1,995
0
49
Vancouver,Washington
Sep 4, 2005
#3
  • Sep 4, 2005
  • #3
Did you plus the wire back into the dizzy? Did you make sure that all connectors are back in there correct spot?
 
P

Polter83

New Member
Jul 27, 2004
74
0
0
Sep 4, 2005
#4
  • Sep 4, 2005
  • #4
Im going with the timings got to be off.. did you account for the distributors rotation, or a tooth off, as you insert it? It turns when you put it back in.. so lining up the lines you made isnt right.

Lets hope its that.. Need to back the dizzy up and then insert it so that the lines meet up. Then make sure the rotar is at one. Wire are all hooked up with the 351, or HO firing order. Make sure the car is grounded on the back of the head or block. After checking this, and car still not start, try turning the distributor, in place, as if you were going to retard or advance the timing..just in small increments..and see how that affects the start.
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Sep 4, 2005
#5
  • Sep 4, 2005
  • #5
crossed wire ?
 
You must log in or register to reply here.

Similar threads

R
Efi to car pcv HELP !
  • rgrendell
  • Jul 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
709
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 2, 2026
Noobz347
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
383
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
346
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
833
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
682
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?