Intake to plenum gasket.

1

1stmust02

New Member

Mar 2, 2004

35

0

0

Jun 27, 2006

#1

• Jun 27, 2006

• #1

I have a 2002 GT. I recently purchased a TB and Plenum Assembly from Accufab.
I am going to install them this coming weekend. Of course they don't come with a new gasket for the intake to plenum assembly.
So anticipating destroying the existing gasket when removing the old TB and plenum I ordered a new one.
Well the guy calls me today and says the gasket is in, but it is not a gasket it is a O-ring.
Is this correct? Should it be a gasket or an o-ring for the intake to Plenum assembly??
Does anyone have a part number for the gasket???
Thanks
Paul

 

B

bdcardinal

tree hugger

Jun 10, 2003

3,612

16

69

santa barbara, CA

Jun 27, 2006

#2

• Jun 27, 2006

• #2

its a kind of o-ring. ive taken a bunch off and never destroyed the gasket.

 

1

1stmust02

New Member

Mar 2, 2004

35

0

0

Jun 27, 2006

#3

• Jun 27, 2006

• #3

O-ring.

BDcardinal.
Thanks. I appreciate it.
I am stopping down at the local Ford dealer and take a look at it.
Good to hear you haven't destroyed any of the gaskets.
But you never know.
It is only a 7.50 piece so I will get it.
Thanks again.
Paul

 

streethorse

15 Year Member

Oct 8, 2005

1,042

6

58

Dallas Texas

Jun 27, 2006

#4

• Jun 27, 2006

• #4

If you are halfway careful you wont need a new one, I have had mine on and off twice with no problem.

 

1

1stmust02

New Member

Mar 2, 2004

35

0

0

Jun 27, 2006

#5

• Jun 27, 2006

• #5

gasket and plenum.

Thanks streethorse. I will definitely be careful. But if I need one I will have it.
Does the gasket that is on there, does it look like some type of o-ring???

 

streethorse

15 Year Member

Oct 8, 2005

1,042

6

58

Dallas Texas

Jun 27, 2006

#6

• Jun 27, 2006

• #6

Yeah it is an O-ring and it has a groove that it lays in. As long as it stays
put and does not slip out of position you will be OK

 

1

1stmust02

New Member

Mar 2, 2004

35

0

0

Jun 27, 2006

#7

• Jun 27, 2006

• #7

gasket and plenum.

Thanks again.
The parts guy at Ford wasn't sure and I really didn't know. He thought it was one of those flat material type gaskets.
Good to know that I am getting the right gasket/o-ring.
If I get the old one off without any damage I will save the new one for any future needs.
Again Thanks for you time. I do appreciate it.
Paul

 

DTNODYA

Member

Dec 15, 2005

831

1

16

Jun 27, 2006

#8

• Jun 27, 2006

• #8

Here is a pic that I took from when I changed out my steering rack bushings ... the gasket was on the table apparently. Notice the big green photoshopped arrow pointing to the gasket. That is what they look like.

hope that helps.

 

stangGT97

New Member

Dec 22, 2004

1,299

1

0

Boston area, MA

Jun 27, 2006

#9

• Jun 27, 2006

• #9

uhhh when I bought my PI manifold, I thought it had the plenum/manifold gasket built into it? I'm fairly certain it did anyway

 

CRZYHRSGT

New Member

Feb 14, 2004

240

0

0

5.7 miles north of THE Ohio State University

Jun 28, 2006

#10

• Jun 28, 2006

• #10

Yep, rubber....gotta make sure that plaasteeek manifold stays sealed to the aluminum plenum.

BTW, DTNODYA, Couldn't help but notice the circular saw blades...was your's that hard to get of?

 

1

1stmust02

New Member

Mar 2, 2004

35

0

0

Jun 28, 2006

#11

• Jun 28, 2006

• #11

gasket and plenum.

DTNODYA.
Thanks for the picture of the gasket.
The part I got from Ford last night doesn't look like that at all.
The part he sold me looks like just the that blue/green colored o-ring in the inner part of the gasket.
I guess he sold me the wrong part or just the o-ring part of the gasket.
Well, I will try to remove the plenum carefully so I don't destroy the gasket.
I will bring your picture to him and see if he can find the right part.
Thanks.
Paul

 

DTNODYA

Member

Dec 15, 2005

831

1

16

Jun 28, 2006

#12

• Jun 28, 2006

• #12

1stmust02 said:

DTNODYA.
Thanks for the picture of the gasket.
The part I got from Ford last night doesn't look like that at all.
The part he sold me looks like just the that blue/green colored o-ring in the inner part of the gasket.
I guess he sold me the wrong part or just the o-ring part of the gasket.
Well, I will try to remove the plenum carefully so I don't destroy the gasket.
I will bring your picture to him and see if he can find the right part.
Thanks.
Paul

Click to expand...

no prob. Here's a couple more pics that may help you understand ..

This is a pic of my intake on my car before I replaced it (has gasket on it)



Here's a pic of my POS intake on the ground after I took it off (no gasket on it)



Here's a pic I took at the Ford dealership of a new one with aluminum crossover with no gasket on it:

CRZYHRSGT said:

BTW, DTNODYA, Couldn't help but notice the circular saw blades...was your's that hard to get of?

Click to expand...

LOL! Those damn blades haven't moved in years. I don't even know if we have the saw anymore ...

 

Attachments

• p32800034tn.th.webp

  2.8 KB · Views: 179
• p32900037uo.th.webp

  2.8 KB · Views: 160
• p33000024an.th.webp

  2.8 KB · Views: 134

1

1stmust02

New Member

Mar 2, 2004

35

0

0

Jun 28, 2006

#13

• Jun 28, 2006

• #13

gasket and plenum.

DTNODYA,
Thanks for the manifold pictures, they really helped.
What it looks like, he sold me just the o-ring that fits into that intake opening gasket, not that whole gasket assembly.
I wish I had a part number for that whole gasket so I can bring it to him.
Well, I printed out the pictures, including the one of the gasket itself and will stop by Ford tonight and show him those pictures.
I am probably being paranoid on getting a new one. Everyone I spoke to on this said in most cases it doesn't break when you take them off, but don't want to not have a replacement gasket in case I destroy the old one.
Thanks again.
Paul

 

DTNODYA

Member

Dec 15, 2005

831

1

16

Jun 28, 2006

#14

• Jun 28, 2006

• #14

Sent you a PM ... it should do the trick.

 

1

1stmust02

New Member

Mar 2, 2004

35

0

0

Jun 28, 2006

#15

• Jun 28, 2006

• #15

gasket and plenum.

DTNODYA.
Thanks for the PM. Excellent pictures and thanks for the part number of the gasket.
I sent you a PM in response.
Later.
Paul