Intake?

[95_cobra123]

OK I have done this before but I still can’t think of witch one to go with. I have a 95 Cobra ok well I have headers cold air and TB 70mm. I have sitting right next to me a professional products typhoon manifold upper and lower well some people say the cobra one is better some say the typhoon is. I have all the parts for it to. If I put it on will I notice a big difference Compared to the Cobra one... Thanks guys


P.S. I also have the Elbow that goes with it.

 

[ProKiller]

if you have it, put it on and see if there is a difference. you say you have all the parts. Make up your own mind. only cost the price of some gaskets. take you an afternoon to swap them out. drive around with the typoon on and see what you think. nothing like actually doing it over someone telling you.

 

[Venom351R]

If I put it on will I notice a big difference Compared to the Cobra one... Thanks guys


P.S. I also have the Elbow that goes with it.

I doubt you will notice a "set you back in your seat" diffrence. If you really wanted to find out which one was better you would have to dyno the car w/ each one to see there diffrences.

 

[wytstang]

I would just swap it out and see for my self you just may feel a bit of a difference. If you don't you can put the cobra back on and sell the typhoon(which by the way is a copy of the E-brock rpm). It just the cost of a few gaskets and coolant and your time then report back and lets us know.

 

[helix007]

are u selling the typhoon?

 

[95_cobra123]

Mabe... but it will be elbow and everything never been out of the box...


give me a bid