• Mustang Forums
  • Special Production

Roush intercooler problems!!

  • Thread starter Thread starter C.Saleen
  • Start date Start date Aug 21, 2005
C

C.Saleen

Member
Jan 18, 2004
228
0
16
Aug 21, 2005
#1
  • Aug 21, 2005
  • #1
ok ive tried it all, the fans for the intercooler wont turn on?
so i replaced boht fans the wiring harness the blue box the fuse?
and they still ont turn on, ive run power to boht fans and the intercooler water pump and boht turn on, which brings me to no power so i replace the harness, the the blue module and also replace the 20 amp fuse and the relay on the blue module? any one have any idea whats next?
 

Head Paneer

Founding Member
Nov 7, 2001
1,823
0
37
Surf City, CA
Aug 22, 2005
#2
  • Aug 22, 2005
  • #2
Have you verified that there is power to the “blue box”? I have to think it serves the same purpose (fan turn-on delay, relay, etc.) as the purple plastic box located in my passenger fender well.

It would be nice if someone on this board had a wiring diagram for the circuit. In the mean time, you could hook up a manual switch with a relay to turn the fans on.
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
Aug 22, 2005
#3
  • Aug 22, 2005
  • #3
I remember a guy who installed a manual switch to his fans back east. He had schematics for everything. The only reason I remember him is he changed it back becuase he burned up fans from them running and running.
I'll see if I can find his info.



Marcus
 
C

C.Saleen

Member
Jan 18, 2004
228
0
16
Aug 22, 2005
#4
  • Aug 22, 2005
  • #4
what would be the best way to check the power on the blue box?
the reason i replaced the blue box is that my slef and joe at chciane thought it would be the next logical step, i was thinking of wiring it up to a switch but id like to have it work the right way with the money ive spent on the box and the wiring harness
 

Head Paneer

Founding Member
Nov 7, 2001
1,823
0
37
Surf City, CA
Aug 23, 2005
#5
  • Aug 23, 2005
  • #5
C.Saleen said:
what would be the best way to check the power on the blue box?
the reason i replaced the blue box is that my slef and joe at chciane thought it would be the next logical step, i was thinking of wiring it up to a switch but id like to have it work the right way with the money ive spent on the box and the wiring harness
Click to expand...

Again, a wiring diagram would be most helpful. The box has to get power with the ignition on. It is a matter of determining which wire it is. It should also have a ground, so you can check the continuity.

Was there anything out of the ordinary that led up to this problem? When the box failed on our car, I think it was actually the result of previous work Chicane did. I am almost certain they inadvertently shorted out the IC board in the box.

My suggestion for a manual switch is for a temporary fix only, btw. Do it down and dirty cheap until you can get the real problem sorted out.
 
You must log in or register to reply here.

Similar threads

Resolved Holley terminator integration into CCRM
  • BrandonMP
  • Feb 25, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
202
SN95 4.6L Mustang Tech Feb 27, 2026
BrandonMP
C
No Crank--have power(accessories)
  • chazmanaz
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
513
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 17, 2025
chazmanaz
C
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
40
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2026
Mhaley2006
M
B
No spark. 1990 foxbody 5.0 gt
  • Boogi
  • Nov 16, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
163
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 16, 2025
Boogi
B
Y
2004 Roush - Dome Lights and radio not working
  • Yurei
  • Nov 10, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
352
1996 - 2004 SN95 Mustang -General/Talk- Nov 20, 2025
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Special Production
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?