Next project refurbishing the interior roof.
Its in good shape, no serious rust, just surface, some dried adhesive. I found and old thread with a link. I propose the sand / wire brush as much as I can, to clear the thick of the crud off, then Metal Prep it and brush / roller Eastwood Rust Encapsulator over it.
Sound good?
Its in good shape, no serious rust, just surface, some dried adhesive. I found and old thread with a link. I propose the sand / wire brush as much as I can, to clear the thick of the crud off, then Metal Prep it and brush / roller Eastwood Rust Encapsulator over it.
Sound good?