Is 220* for water Temp to hot?

S

stng94

New Member

Mar 24, 2004

104

0

0

St. Pete, FL

Aug 24, 2004

#1

• Aug 24, 2004

• #1

What should I be running at. Thanx in advance.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Aug 24, 2004

#2

• Aug 24, 2004

• #2

On a STOCk car, it's fine. With Al. heads, you are way too hot.
You should be below 200. If you have the stock radiator, you may want your next mod to be a FLuidyne and a $6 180* stat.
(or for now, a 180* stat and a good radiator flushing....that should help)
RC

 

squall9393

New Member

Feb 7, 2004

534

0

0

Oceanside, CA

Aug 25, 2004

#3

• Aug 25, 2004

• #3

An aftermarket fan such as Flex-a-Lite will allow you to select the temp it will turn on and regulate at. It also has it's own coolant tempurature sensor that senses the water temp more accurately- which is at the radiator.

JJ

 

Venom351R

Founding Member

Apr 27, 2002

4,548

41

98

MAINE

Aug 25, 2004

#4

• Aug 25, 2004

• #4

Mine never gets over 210, most of the time it runs between 190-205

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Aug 25, 2004

#5

• Aug 25, 2004

• #5

mine is running rediculously hot

it was 107 degrees here yesterday and i was cruising with the GF with the a/c onm in traffic.

240+ degrees. I must have some magical headgaskets

my fan has been screwed ever sinceford did the recal and the high speed wont come on.

I need to hard wire it but NO ONE ever answers my questions on whether its possible the way I propose.

the ccrm fan switch mod will not work on my car

 

94TURBO5 O

New Member

Mar 14, 2004

2,509

0

0

VA

Aug 25, 2004

#6

• Aug 25, 2004

• #6

Yeas that's normal and weird for our cars to operate so extremely high. If you do the high speed fan mod it will drop the temps quickly.

SNOOZER, why doesn't grounding the wire work for you? Take a test light and ground the mofo clip to the battery ground and prod the #17 pin.