is it possible? ive never seen it before

superstang01 · May 16, 2007

Is it possible to run 12's N/A with 3.73's with bolt ons and suspension work?

what would i need to do this ?,i really want to do it bad!

ive seen ppl hit 12's on 4.10s but not 3.73

this might sound sort of dumb, but i was just curious

SaleenGT2001 · May 16, 2007

it MAY be possible but i dont think it will be dont without a LOT of mods including cams and intake.

Sun Devil Cobra · May 16, 2007

Put your car on a diet, bro. Not to sound too extreme, but approximately every 100lbs. equals 1/10 of a second.

To accomplish 12's, you should also do:

Underdrive pullies
L/T headers
MAF
throttle body
Dr. Gas "X" pipe
Programming chip
rear seat delete + spare tire removal
Also, your 315's aren't helping matters.

BaXTeR3221 · May 16, 2007

+1 for weight reduction. Also, some slicks will help.

Tim2002GT · May 16, 2007

Try this link.

http://forums.************.com/4-6l-2v-tech/1877-five-components-12-second-na-gt.html

Just switch the ********** with the words modular depot and it will work.

65fastback2+2 · May 17, 2007

one of the mach guys runs mid 11's on a n/a motor with a few bolt ons...but the car weighed 3500 pounds, hes got it down to 2900....lifts the front wheels off the ground n/a

whyask · May 17, 2007

there is a guy in are crew that runs 12.956'

Grip in a box by Maxium motorsports
Stage 2 heads and cams
UD Pullies
LT's and Hpipe
slicks
4:10s
stage 2 clutch and flyweel
full weight reduction..(only driver seat, no carpet, all metal on the inside)
Race gas and one hell of a tune...

Its possible but can get pricey !!$$$

Im have a best of 13.3 right now , im running cams and a 50shot , full weight redution and suspension.
race gas and 4:10s and slicks.....check my sig

Stang|ess · May 17, 2007

He wants to know if you can do it with 3.73s

2001 Bolt On GT Vert SOLD
12.997@ 103.75 1.72 60'

John did it in a vert, but probably 4.10. Just lose lots of weight, and drive it like you stole it, and it probably can be done.

01Steeda · May 17, 2007

it can be done, suspension means more than most of the bolt ons you cab buy. the thing is getting the car light enough and not just throwing suspension at it, but setting up a good suspension. pinion angle and wieght transfer.

I have been through 3 engine setups, but yet havent really started on my suspension until now. I wanted to get some kowlegde on it before starting. most of the aftermarket pieces you buy are really not much better than stock. MM makes some great pieces and so does strange engineering.

thats what the bulk of my suspension will be.

my buddies car runs deep 8's and pulls 1.3 sixties on stock style bolt in rear suspension.... hell he even has a set of monroe shocks on it, but the upper's/ lowers and front suspension is designed to work together.

he hooks pretty good

whyask · May 17, 2007

And yes there is a god..thats freakin sweet.. is that you're buddy.??, whats his suspension set up...?? If you know it..??

Bluecrew07 · May 17, 2007

im at 13.4 N/A Gt
3.73 gearse
SCT tune
3500 Stall Converter
Eibach springs
Rear Seat delete
Bolt ons
Stock intake

Now i have fiberglass hood so that should get my weight down and hopfully i will be in the 12's when i go to the track

whyask · May 17, 2007

damn so I guess I suck monkey nuts at the track...Guess I just need more practice..you think my setup, dipping into the mid 12's should be possible.??

01Steeda · May 17, 2007

Yeah thats my buddies car,... I wont get into the engine because you would hear alot of hating on here.

I dont know the specifics on it, but I asked him about my car and wether i needed rear coil overs... he laughed lol. he is running just bolt on parts, but i dont know what brands.

thats the old engine on a ton of nitrous,.. next is a 106mm setup.

he is going to be the driver for our pinks car..... and driver is the most important part of getting the 12's we are talking about.

spitfirees20 · May 17, 2007

Bluecrew07 said:
im at 13.4 N/A Gt
3.73 gearse
SCT tune
3500 Stall Converter
Eibach springs
Rear Seat delete
Bolt ons
Stock intake

Now i have fiberglass hood so that should get my weight down and hopfully i will be in the 12's when i go to the track

Wait, what? You had a 13.4 your last time at the track, installed a fiberglass hood, and hope to run 12's now?

Bluecrew07 · May 17, 2007

spitfirees20 said:
Wait, what? You had a 13.4 your last time at the track, installed a fiberglass hood, and hope to run 12's now?

the hood a little more suspencion and different tires

Bluecrew07 · May 17, 2007

whyask said:
damn so I guess I suck monkey nuts at the track...Guess I just need more practice..you think my setup, dipping into the mid 12's should be possible.??

we are talking about N/A cars here

spitfirees20 · May 17, 2007

Oh alright

Bluecrew07 · May 17, 2007

plus weight makes a big difference

Stang|ess · May 18, 2007

100 lbs = 0.1 sec not huge.

blckstng96 · May 18, 2007

the stock hood is fiberglass anyway for 1 and an aftermarket 1 deff wont be the make or break of 12s haha.

is it possible? ive never seen it before

Active Member

Well-Known Member

New Member

Member

New Member

New Member

seeking cyber partner(s)

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

seeking cyber partner(s)

Member

Similar threads

Privacy & Transparency

Privacy & Transparency