is my hood gonna fly off?!

slidewayz94 · Jun 22, 2005

hood pins can screw up the looks of an aftermarket hood.

stang_dan · Jun 22, 2005

i dont really like hood pins but if u get the good looking ones with the cables they can be ok but they are a must on fiberglass hoods i had a fiberglass hood open on me 3 time. once in a 87 camaro doing 35 then again in the same car doing 40 then in my bronco 3 in cowl doing 85mph but i was so use to it i stuck my head right out the window but it messes everything up my windsheild trim and dented the roof pluss messes the hood up. what happened was the metal for the latch that was made into the fiberglass broke out.

IN CONCLUSION IF YOU VALUE YOU DENT FREE ROOF AND PAINT AND WINDESHEILD SPRING UP FOR THE SAY AT HIGH END 30 BUCK HOOD PINS.
no pins lots of damage eventually
dan

91LX_5L · Jun 24, 2005

cobra259 said:
Hows $25 sound?

check PMs

I dont really like the looks but its better then a new hood + paint + dents

SQUEEZE&STROKE · Jun 24, 2005

Get The Hood Pins Right Away!!!! Take It From Me. I Have Had My Cobra R Hood Fly Through The Windshield And Cave In The Roof Twice. The First Time Was At 75 Mph, No Hood Pins, Right Through The Windshield And Roof. Second Time, At The Track...nitrous Backfire Through The Manifold, Blew The Manifold Off, Ripped The Hood Pins Out Of The Core Support, 120mph Hood Through The Windshield And Through The Roof! Very Costly, Scarry, And Messy!

CManT1914 · Jun 24, 2005

SQUEEZE&STROKE said:
Blew The Manifold Off,

Chythar · Jun 24, 2005

In theory, the hood stoppers should be adjusted to apply a small amount of pressure to the hood when it's closed. That "should" keep the hood from wiggling at speed. Of course, that won't prevent the latch from ripping out. Here's Cervini's (maker of the Stalker kit) installation instructions for their hoods:

http://www.cervinis.com/images/instructions/101,102.pdf

91LX_5L · Jun 24, 2005

ordering some now! im gonna adjust my stops for now till i get em

FastFord · Jun 24, 2005

91LX_5L said:
yea im not really a fan of hood pins, anyone got pics of them?

SQUEEZE&STROKE · Jun 25, 2005

CManT1914 said:

YEP, BLEW THE BACK PLENUM OFF MY PERFORMER RPM UPPER INTAKE, LOTS OF METAL, FIRE, LOUD EXPLOSION. WET SYSTEMS DONT LIKE WHEN VALVES ARE DROPPED AND THE NITROUS/FUEL MIXTURE IGNITES IN THE MANIFOLD! I STILL HAVE HALF OF IT. I'LL HAVE TO GET THE PICTURE UP!

94GTLaserRC · Jun 25, 2005

super302 said:
I think they look badass, and they are CHEAP insurance (like $15 from summit or jegs)

JimBowy · Mar 3, 2006

FastFord said:

Bringing this thread back to life. I like the look of those hood pins FastFord. Can you tell me what brand they are?

94GTLaserRC · Mar 3, 2006

JimBowy said:
Bringing this thread back to life. I like the look of those hood pins FastFord. Can you tell me what brand they are?

:Word:
RC

diablostang · Mar 3, 2006

Get hoodpins.

My STOCK hood flew up, oliberating my cowl panel.

It ain't worth it, lol.

badstang123 · Mar 3, 2006

I have an aftermarket with no pins and have had it up to 130 mph with no problem. It just depends on how the hood is set up where the latch is. You can tell pretty easily while installing it how well it will hold. If you would rather be safe go with the pins. I hate the look though, so I opted to leave them off.

mustangt562 · Mar 4, 2006

badstang123 said:
I hate the look though, so I opted to leave them off.

Look vs Life=

Methodical · Mar 4, 2006

slidewayz94 said:
what brand of Cobra R hood do you have? I have the Ford hood, and have had no issues for years.

DITTO

Methodical · Mar 4, 2006

FastFord said:

Those pins aren't bad looking. Maybe paint them the color of the hood to blend in - uhmmm

JimBowy · Mar 4, 2006

Methodical said:
Those pins are bad looking. Maybe paint them the color of the hood to blend in - uhmmm

You have to be kidding.

SVT3183 · Mar 4, 2006

its seems like a lot of people claim not to have problems with higher quality hoods like the cervini's and ford (which are really h.o. fibertrends). is this true? maybe it has to do with the metal around the latch area on the hood

SVT3183 · Mar 4, 2006

and i also like those pins in the picture. anybody know the brand?

is my hood gonna fly off?!

slidewayz94

New Member

stang_dan

91LX_5L

SQUEEZE&STROKE

New Member

CManT1914

New Member

Chythar

Recently finished repairing my rear

91LX_5L

FastFord

SQUEEZE&STROKE

New Member

94GTLaserRC

Squint as you approach, lest you be blinded by my

JimBowy

Member

94GTLaserRC

Squint as you approach, lest you be blinded by my

diablostang

New Member

badstang123

New Member

mustangt562

Member

Methodical

Methodical

JimBowy

Member

SVT3183

Member

SVT3183

Member

Similar threads

is my hood gonna fly off?!

New Member

New Member

New Member

Recently finished repairing my rear

New Member

Squint as you approach, lest you be blinded by my

Member

Squint as you approach, lest you be blinded by my

New Member

New Member

Member

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency