is this what u need???

[DDSTANG94]

is that the adapter harness attached to it that u need to run it in the 1995-1994 mustangs? how do u "SPLICE" it in

Ebay link removed

Matt

 

[BlownFiveLiter]

PMAS sells a plug & play harness to convert from the six wire MAF to a four wire like ours, so you don't have to splice. http://www.massairsystems.com/E-PIGTV.htm

 

[Stanger007]

PMAS sells a plug & play harness to convert from the six wire MAF to a four wire like ours, so you don't have to splice. http://www.massairsystems.com/E-PIGTV.htm

+1, I got this. Don't like splicing factory wires.

 

[DDSTANG94]

cool, thanks guys! next ? about this is can u mount the lightning maf in the stock intake setup, or do i need to buy a cold air kit?

 

[BlackVert]

i don't like wasting good money on something simple to do myself

i got some 4 pin connectors from radio shack for $3 and soldered them. took 15 minutes

it doesn't fit in the stocl intake setup, it is too big

i got an adapter that bolts to the flange side of the meter and then i got a k&n filter.

 

[DDSTANG94]

i don't like wasting good money on something simple to do myself

i got some 4 pin connectors from radio shack for $3 and soldered them. took 15 minutes

it doesn't fit in the stocl intake setup, it is too big

i got an adapter that bolts to the flange side of the meter and then i got a k&n filter.

does the meter on the opposite side of the filter attach to the stock tube? do u have a pic? thanks man