I've decided to turbo my n/a 2.3L 91 motor

jgt58 · Jun 13, 2005

Yea . I wont be running above 10 psi , as this is my daily driver and just want a little more horses till I can get through mechanics school. My ? is , that I will be running a IHI turbo and will the exaust manafold bolt up to my dual plug car? Thanks! PS , I am well aware of the dangers of the cast pistons thats why boost will not be turned up above 10 psi and will be running an innercooler so please no comments on " ah just get a turbocoupe motor" as I dont have the place to do an engine swap.

freakintiger · Jun 13, 2005

I don't believe they ever changed the exhaust bolt pattern on these heads, I know they have at least two intake bolt patterns.
If unable to find out through the forum, I would just go out and look at/purchase a gasket and compare.

Asha'man · Jun 13, 2005

Exhaust manifold will fit, it's the same basic block through the entire 2.3 series. I hope you're gonna have fuel to do this.

Brian

jgt58 · Jun 13, 2005

yea , ive got a list of parts to buy , like 35lb injectors , prolly a walbro 255lph fuel pump , a/f gauge , boost gauge. The name of the game on the n/a motor even with low boost levels is no detonation!!!! I'd rather run rich on my setup than lean.

ChristmasGT · Jun 13, 2005

http://rothfam.com/forsale/

I dont know if your interrested but there are some Pistons over on that site, I mean hey, worth a shot.

Stinger · Jun 13, 2005

Good luck.

You still didn't mention what you are going to CONTROL fuel with.

stackz · Jun 13, 2005

considering he'll probably blow the engine anyway without putting an ecu swap on it, I'd say just grab an el cheapo vortec fmu and toss a set of 19lb'er injectors on the engine and see what happens heh.

arent stock n/a like 14lb? 19lb should keep the ecu happy and the fmu should be able to handle the rest at low boost. hell, only one way to find out.

oh by the way man, I got my la3 ecu for my swap for $20 off the net.

here's a couple of ecu's for your search pleasure, hopefully nobody will beat you to them though considering the price they are offered at haha!!

1988
Engine Computer
Ford Thunderbird E7ZF-A1D A 4H2671 $35 Hull Road Auto Parts USA-MI(Monroe) E-mail 1-800-803-5425

1988
Engine Computer
Ford Thunderbird GET NUMBERS 006566 $34.9 Southern Tier Auto Recycling USA-NY(Beaver-Dams) Request_Quote 1-800-640-7995 Request_Insurance_Quote

Engine Computer
E7ZF-A1D DD5529 $25 Go Go Auto Parts USA-MI(Delton) Request_Quote 1-800-833-4645 Request_Insurance_Quote

1988
Engine Computer
Ford Thunderbird EEC CONT. PROCESSOR , 2.3L , M.T--U 91 $25 Crawford Sales and Service USA-SC(Moncks-Corner) E-mail 1-800-347-1547

oh and here's an LB3 which you can also use...$25 + shipping....

http://www.turboford.org/ubb/ultimatebb.php?ubb=get_topic;f=6;t=008024

NjccBflo · Jun 13, 2005

Mani should bolt up.

I wouldnt run more then 8 psi on the stock compression. At least not without a nice IC.

get some kind of fuel mgmt, some forged pistons, and and the most efficient IC You can fit.

With all of that... Good Luck

-Nick

Red_LX · Jun 13, 2005

Might also wanna start figuring out how you're gonna run the oil return line from the turbo.

jgt58 · Jun 13, 2005

the guys over at ranger station has helped me out with that. And also , wouldnt the maf counteract for the boost? http://therangerstation.com/tech_library/TurboInstall.html
Let me know if I am wrong about the fmu.

jgt58 · Jun 14, 2005

stackz said:
considering he'll probably blow the engine anyway without putting an ecu swap on it, I'd say just grab an el cheapo vortec fmu and toss a set of 19lb'er injectors on the engine and see what happens heh.

arent stock n/a like 14lb? 19lb should keep the ecu happy and the fmu should be able to handle the rest at low boost. hell, only one way to find out.

oh by the way man, I got my la3 ecu for my swap for $20 off the net.

here's a couple of ecu's for your search pleasure, hopefully nobody will beat you to them though considering the price they are offered at haha!!

1988
Engine Computer
Ford Thunderbird E7ZF-A1D A 4H2671 $35 Hull Road Auto Parts USA-MI(Monroe) E-mail 1-800-803-5425

1988
Engine Computer
Ford Thunderbird GET NUMBERS 006566 $34.9 Southern Tier Auto Recycling USA-NY(Beaver-Dams) Request_Quote 1-800-640-7995 Request_Insurance_Quote

Engine Computer
E7ZF-A1D DD5529 $25 Go Go Auto Parts USA-MI(Delton) Request_Quote 1-800-833-4645 Request_Insurance_Quote

1988
Engine Computer
Ford Thunderbird EEC CONT. PROCESSOR , 2.3L , M.T--U 91 $25 Crawford Sales and Service USA-SC(Moncks-Corner) E-mail 1-800-347-1547

oh and here's an LB3 which you can also use...$25 + shipping....

http://www.turboford.org/ubb/ultimatebb.php?ubb=get_topic;f=6;t=008024

? How the heck is an ecu from a thunderbird that uses a vam going to control an engine with a maf?

mr_woodster · Jun 14, 2005

this should be interesting...

stackz · Jun 14, 2005

jgt58 said:
? How the heck is an ecu from a thunderbird that uses a vam going to control an engine with a maf?

because you swap over to vam durrr.

hell, do whatever you want man but if you try to run it with the stock electronics you're probably going to blow that engine skyhigh even at low boost.

by the time you buy bigger injectors, a chip for the stock ecu, fuel pump, etc. you could have bought a tc ecu and vam and just hacked the harness and been done with it.

ChristmasGT · Jun 14, 2005

Yeah I got my Large Vam and LA3 with pigtails for like 120 bucks.

jgt58 · Jun 14, 2005

correct me if I am wrong , but I have a dual plug car , and the vam setup is for a single plug car with a distributor. Right , so how is this setup gonna work on a dual plug car with no distributor?????

jgt58 · Jun 14, 2005

and by the way , I would do a swap but some of us dont have garage space , live in a townhouse and dont have engine stands or engine hoists. but i've just decided to leave it alone since my recent decision to go back to school and get my degree in mechanics and get asc cert. , at that point I'll just buy a cobra 96-98 style.

ChristmasGT · Jun 14, 2005

Or you guys just buy an SVO or Turbocoupe, I love Black TC's

Find a Cheap TC that runs and go from there or better yet an SVO!

stackz · Jun 14, 2005

jgt58 said:
and by the way , I would do a swap but some of us dont have garage space , live in a townhouse and dont have engine stands or engine hoists. but i've just decided to leave it alone since my recent decision to go back to school and get my degree in mechanics and get asc cert. , at that point I'll just buy a cobra 96-98 style.

lol, I live in an apartment complex and have my svo torn down right now in the parking lot...

several options for retaining the dual plug head with the swap or just toss a dizzy in the plugged dizzy hole and leave one set of plugs unused. you'd be surprised what you can get on ebay for a DIS setup.

jgt58 · Jun 16, 2005

where would you put the distributor?

Stinger · Jun 16, 2005

In the distributor hole...

I've decided to turbo my n/a 2.3L 91 motor

jgt58

New Member

freakintiger

New Member

Asha'man

jgt58

New Member

ChristmasGT

New Member

Stinger

stackz

NjccBflo

New Member

Red_LX

I’m not much help unless you’re looking for ****!

jgt58

New Member

jgt58

New Member

mr_woodster

Active Member

stackz

ChristmasGT

New Member

jgt58

New Member

jgt58

New Member

ChristmasGT

New Member

stackz

jgt58

New Member

Stinger

Similar threads

I've decided to turbo my n/a 2.3L 91 motor

New Member

New Member

New Member

New Member

New Member

I’m not much help unless you’re looking for ****!

New Member

New Member

Active Member

New Member

New Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency