Haha no just of it starting and stuff period
that sounds pretty exciting...
box mounted to rear deck lid.... so much bass for 2 6.5"s ! I'm happy. Deck doesn't rattle at all, bass is nice and clear.
Unfortunately I need to resize the 12" sub box, it's like 1/2" too tall to fit under this box
Thought I made this box right but it just wasn't mounting as high as I was planning on it. Oh well
You're like the Jaquelin of all trades in this thread. Good stuff.
I don't know how you work in the cold, all my projects are on hiatus for nicer weather.
When are you going to visit Virginia?
ok, looks nice... now get the darn car running and driving on the road! lolz
Great build, just read through the thread and as for that tapping did you use the V-6 drive shaft? Also, did your accessories clear the hood without rubbing? Thanks, can't wait to see a vid of the stang putting down some rubber. Keep up the good work!
Thats good news, the reason i asked about the v-6 driveshaft is my buddy did a similiar swap, but with a tremec. He had a similiar sound and it was because the yoke was wrong. It kinda sounded like a valve was slapping idk if that helps. Also, what spark plugs are you using in the engine?
Warmed it up for the first time and for some reason it's leaking around the thermostat housing again, so I need to figure out why.
Here's a video of it running
ON the thermostat housing gasket did you coat both sides of the gasket lightly with some rtv sealeant before installing it? If not it will always develop a leak. Also I bought a nice looking crome thermostat housing and no matter what I did it leaked. Took it off and put a straight edge on it and it was warped, so I cleaned up the original housing and put it on the engine and no more leaks.
well, I'd completely understand this if there was a port to input the coolant into the explorer manifold, but I do not see where it would go.
In good news, I ordered a moates quarterhorse with a custom tune for my engine specs
From whom did you order your moates quaterhorse chip?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?