Hey guys I am going to be ordering the JMC hydraulic clutch system for my car. I want to know if anyone had run this on a 1969 and power brakes? I have searched for this over and over again to no avail.
JMC Hydraulic clutch kit
- Thread starter 69Rcode_Mach1
- Start date
chepsk8
Founding Member
I have thier T-5 set-up on Cobrask8. I like thew set-up, still waiting to fire the motor to see if there is enough travel to fully dis-engage the clutch.
red65
Member
fwiw -- I installed the JMC hydraulic kit on a '65 with T-5 (no power brakes). Had some trouble mounting to the transmission originally, since it's a '95 Cobra trans and the kit was made for 87-93. The guys at JMC were very helpful and swapped out the parts. The setup now works quite well - no complaints. 
i have the JMC setup on my '67 with power brakes. it was an extremely tight fit, you definitely have to remove the brake master cylinder and booster to install the clutch master cylinder. after i got the clutch master in, the brake booster was hitting it and not letting me remount it so i had to make a 1/4 inch metal spacer to put between the booster and the firewall. everything fits very snug . but trust me it was definitely worth it. the feel of the pedal is awesome with a king cobra clutch (i have one as well).
Awesome well i have made a good decision in buying this according to the replies. I hear the 67 and 69 have the same firewall.
