• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Junkyard/Intake

  • Thread starter Thread starter slow5.0gt
  • Start date Start date Dec 14, 2007

slow5.0gt

New Member
Aug 12, 2006
138
0
0
Dec 14, 2007
#1
  • Dec 14, 2007
  • #1
Hey again everyone its a long shot but I was curious to know if anyone could tell me if the intake off of any other fords just the upper will fit on a 5.0 performer manifold lower intake.

Reason being is that the upper intake has a hole where the one of the bolts slide in at the end so its not snug on top of the lower intake letting in air.

Should I just try and scrounge the junkyards for an upper intake to replace it or would i just have to buy a new upper manifold....


if you are wondering what type its the first one.
http://www.jegs.com/webapp/wcs/stores/servlet/product2_10001_10002_747526_-1
 

jtfairlane

New Member
Mar 5, 2006
468
3
0
Dec 14, 2007
#2
  • Dec 14, 2007
  • #2
There are no factory ford intakes that will fit an Edelbrock lower.

Buying a new upper manifold to repair a hole (I'm not quite sure what you mean by that, pictures would be helpful) would be a real waste of money.

Since you have to remove your current upper no matter what, the smart and economical thing to do would be to take it to an engine/machine shop and simply have the damage repaired. Odds are the repair will cost much much less than buying a whole new upper, and it will be functional.
 

Blown331LX

Member
Apr 5, 2005
227
0
16
Chapel Hill, NC
Dec 14, 2007
#3
  • Dec 14, 2007
  • #3
Yeah man Im a little lost about the "hole" your talking about. Is the intake broken? That intake on your motor is probably not doing any good without any sort of cam, exhaust, or throttle body. More air in, more air out. Buy a stock Mustang upper and lower for $50, and invest money in your exhaust before your intake.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Dec 14, 2007
#4
  • Dec 14, 2007
  • #4
you could probly have the intake you have fixed. maby around $30-50
 

slow5.0gt

New Member
Aug 12, 2006
138
0
0
Dec 15, 2007
#5
  • Dec 15, 2007
  • #5
Heh days i really need a camera, the best way i can explain it is that I currently have 7 bolts in the upper intake to bolt it to the lower intake the 8th one is on the corner closest to the drivers side.
On brand new manifold there are 8 places to slide in a bolt to torque it onto the lower intake excluding the one inside the intake. IIRC
However the 8th bolt location closest to the drivers side where you can slide a bolt through it to tighten onto the lower intake is broken comletely off.
If you look at it with the upper and lower connected without it being in the engine you will notice that there is a gap between the lower and the uppper intake where the bolt usually slides into.

Take a look at the picture of the gasket and youll see where the bolts coincide with the intake and just picture one of them at the end completely missing.

When I took it to a shop to see if i can get it repaired they claimed that it would do no good to me because it will not be torqued down enough in that corner and therefore still leak.
 

Killer50stang

New Member
May 11, 2004
632
0
0
Dec 15, 2007
#6
  • Dec 15, 2007
  • #6
Ok, you buy and edlebrock intake and won't to get cheap on the upper? This makes no sense to me. Get on ebay. You can get some pretty cheap generic brands.
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Dec 15, 2007
#7
  • Dec 15, 2007
  • #7
slow5.0gt i sent you a PM
 
You must log in or register to reply here.

Similar threads

Engine New lower intake manifold mating surface question
  • 91GTstroked
  • Nov 27, 2024
  • Fox 5.0 Mustang Tech
Replies
17
Views
1K
Fox 5.0 Mustang Tech Dec 7, 2024
91GTstroked
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
V
Engine Antifreeze in oil
  • vinzo
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
5
Views
605
Fox 5.0 Mustang Tech Oct 10, 2024
vinzo
V
B
Saying Hi
  • BriansNSane
  • Dec 20, 2025
  • The Welcome Wagon
Replies
5
Views
414
The Welcome Wagon Dec 21, 2025
BriansNSane
B
Engine Replacing upper/lower intake, anything else?
  • 91GTstroked
  • Nov 4, 2024
  • Fox 5.0 Mustang Tech
Replies
14
Views
1K
Fox 5.0 Mustang Tech Nov 26, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?