just bought a cobra intake

[R.J.]

I just picked up a cobra intake on ebay and I was wondering what the perfered lower intake gasket is for a cobra intake to stock GT heads?

 

[legalize420]

felpro

 

[R.J.]

stock GT p/n or not?

 

[legalize420]

stock GT p/n or not?

not. the upper to lower gasket is different. get the one for the cobra.

 

[legalize420]

http://store.summitracing.com/default.asp?target=egnsearch.asp&N=-42059+400150

 

[Swarzkopf]

I believe that Fel-Pro 1250 is the part number you need...you should double check though.

 

[95cobradude]

what did u pay for that intake if u dont mind me asking?

 

[urban96]

the 1250 is larger then the ports on the stock heads and intake

a stock felpro set should fit just fine..u can most likely re-use the upper to lower gasket

 

[R.J.]

I looked it up on autozones website the lower for a cobra and gt have the same p/n.
95cobradude: I don't mind at all $365.00

 

[95cobradude]

rj: i have my used cobra intake i could have parted with for 300 bucks. the upper was extrude honed, the lower ported by me and i have the gasket, bolts, egr valve, egr valve to header tube, etc. i wish i would have known u were in the market 4 one.

 

[legalize420]

I looked it up on autozones website the lower for a cobra and gt have the same p/n.
95cobradude: I don't mind at all $365.00

check summit

 

[R.J.]

95cobradude: The first place I looked was ebay and there happened to be 3 for sale. Starting from $120-170. I bid and just went with it. I was actually winning two of they at one point. thanks for looking out.

 

[Swarzkopf]

a stock felpro set should fit just fine..u can most likely re-use the upper to lower gasket

Are you talking about using the stock manifold's upper to lower gasket on a Cobra manifold?

If so, NO, you definitely can not do this.

 

[R.J.]

I am obviously not asking about the upper to lower gasket. I was wondering why Parts America list the same lower intake gasket p/n for a 95 GT and Cobra?

 

[urban96]

Are you talking about using the stock manifold's upper to lower gasket on a Cobra manifold?

If so, NO, you definitely can not do this.

i was talking about the lower to heads gasket.

im not sure if the cobra intake has larger lower ports then the stocker but since your not changing the heads that port isnt gonna change and stock gasket (new of coarse) can be used