Just bought a used C&L MAF have question.

_Capricious_ · Dec 30, 2004

I just bought a used 80mm C&L MAF and one of the little sensors is broken on one side. Can I solder it back on or will it affect the sensor? I got 38lb injectors with it as well, so the sample tube is what changes the signal right? The MAF sensor that is bolted onto the meter is factory. Can I just replace it with another factory one?

thanks

Rick 91GT · Dec 30, 2004

Those broken wires mean the electronics are junk...

You can use the electronics from another factory meter if you have it, that is how the C&L works.

To change the calibration the sample tube simply gets swapped out, about $25 from C&L.

Just bought a used C&L MAF have question.

_Capricious_

New Member

Rick 91GT

Mustang Master

Similar threads

Just bought a used C&L MAF have question.

_Capricious_

New Member

Rick 91GT

Mustang Master

Similar threads

Privacy & Transparency

Privacy & Transparency