Just got back from Apex motorsports in Santa Clara. I did a baseline dyno before I slap on the FRPP blower this week. Here's what I pulled.
Run 1.
Max Power = 260.37 Max Torque = 300.11
Run Type: RO Run Conditions: 76.70 F, 30.07 inHg, Humidity: 31%, Uncorrected: 1.00
Run 2.
Max Power = 255.15 Max Torque = 291.70
Run Type: RO Run Conditions: 77.56 F, 30.06 inHg, Humidity: 32%, Uncorrected: 1.00
Run 3.
Max Power = 259.78 Max Torque = 299.12
Run Type: RO Run Conditions: 76.39 F, 30.07 inHg, Humidity: 32%, Uncorrected: 1.00
I'll post the scan when I get a chance later.
Do they seem correct for my mods? I was quite happy with the numbers.
Run 1.
Max Power = 260.37 Max Torque = 300.11
Run Type: RO Run Conditions: 76.70 F, 30.07 inHg, Humidity: 31%, Uncorrected: 1.00
Run 2.
Max Power = 255.15 Max Torque = 291.70
Run Type: RO Run Conditions: 77.56 F, 30.06 inHg, Humidity: 32%, Uncorrected: 1.00
Run 3.
Max Power = 259.78 Max Torque = 299.12
Run Type: RO Run Conditions: 76.39 F, 30.07 inHg, Humidity: 32%, Uncorrected: 1.00
I'll post the scan when I get a chance later.
Do they seem correct for my mods? I was quite happy with the numbers.