Just finished my granada swap, have some Q's

[stangman67]

I just did the front disc swap on my 67. I installed granada MC (manual), correct prop valve, new rotors, calipers, hoses, and lines. I bench bled the master correctly and all the lines over and over, but i still have a sort of soft pedal. Its like it is nothing for an inch and then it gets firm. I have the rears adjusted up till they drag just alittle. Im just wondering if anyone has had this problem or something similar. Thanks for your help!

 

[thehueypilot]

Sounds like the master cylinder pushrod is too short. Check to see if you have an adjustable pushrod and if you do adjust it out about a 1/2" and recheck.

 

[stangman67]

The granada MC came with a 1.5" longer pushrod, but i didnt use it thinking the MC piston should come back to the stop. If i put a longer rod in, it will keep it from returning all the way. Im kinda confused.