Just HOW BAD are the Prof Products TBs???

GreatWhite · Jul 16, 2006

Because you can get a 70mm on eBay for like $110 shipped... that's nuts.

GT89Mustang · Jul 16, 2006

You get what you pay for, you can get used fms ones on the corral for the same price.

68torinogt · Jul 16, 2006

its just edelbrock with another name.

Foxfan88 · Jul 16, 2006

i've heard good about the proproducts TBs, my friend has one and it looks nice and hasnt given him a problem...

795.0pacecar · Jul 16, 2006

I've never had any problems with mine.

Bad92GT · Jul 16, 2006

there intakes alright.. its about the only thing ive had contact with that they make atleast

bubba-dough · Jul 16, 2006

Mine kinda whistles a bit.

Daggar · Jul 16, 2006

I'd say that they're second in quality to Accufab.

rednotch · Jul 18, 2006

Daggar said:
I'd say that they're second in quality to Accufab.

accufab's quality isn;t that great, sure they polish up nice but of the three I've owned two only opened 85% at the blade, took some modifing like most bolt on's to open fully.

Holley's the best I've yet to see.

carbed87 · Jul 18, 2006

GreatWhite said:
Because you can get a 70mm on eBay for like $110 shipped... that's nuts.

almost as bad as their typhoon intakes. no offence to any of the Prof-Prad users, but why would you put CHINESE parts on youre american car. (thats right, chinese, not even japenese)

[/URL][/IMG]

=

[/URL][/IMG]

DMAN302 · Jul 18, 2006

if you drive an "american car" your driving a car chuck full of imported goods(that includes GM, ford, chrysler). Now I hope your not indicating that you don't like products simply because the've come from China..that would just be sad really.

GT_Rich · Jul 18, 2006

hey rednotch...

I just got my accufab and it only opens about 90% too. I was wondering if this had anything to do with keeping airflow from going over the through shaft that the butterfly bolts to. I realize it's easy to grind away the stop until it's 100% open, but then you'll have airflow going directly into that shaft, where now it's diverted.

Any thoughts on this?

dderek · Jul 18, 2006

mine would stick when i bought it.
so i worked it back and forth a few hundred times sitting here.
then.. never a problem

carbed87 · Jul 18, 2006

DMAN302 said:
if you drive an "american car" your driving a car chuck full of imported goods(that includes GM, ford, chrysler). Now I hope your not indicating that you don't like products simply because the've come from China..that would just be sad really.

well, it's their quality too. my buddy has a typhoon intake from them, and i remember him haveing problems with it sealing, fitment issues, etc... and it's not just him, it's people from this board too. im sorry, i just don't like them. and the fact that they are made in china just kinda makes me uncomfterable. i know what you said dman, but i still don't dig em.

bob331T76 · Jul 18, 2006

bubba-dough said:
Mine kinda whistles a bit.

same here mine **** whistles like a mofo drove me crazy.
so then i went with a accufab

87GTSnake · Jul 19, 2006

carbed87 said:
almost as bad as their typhoon intakes. no offence to any of the Prof-Prad users, but why would you put CHINESE parts on youre american car. (thats right, chinese, not even japenese)

My polished "Ford Racing" cobra intake says "Made in China" stamped right on the bottom of the lower.

It looks nice, but as far as quality is concerned i've had nothing but problems with it. (oil throught the pcv)

Made in China =

Daggar · Jul 19, 2006

DMAN302 said:
if you drive an "american car" your driving a car chuck full of imported goods(that includes GM, ford, chrysler). Now I hope your not indicating that you don't like products simply because the've come from China..that would just be sad really.

I'm not always successful but if there's a clear choice between a part made here and one made overseas then I'll definitely take the part made here... even if it means spending a little more.

DMAN302 · Jul 19, 2006

Daggar said:
I'm not always successful but if there's a clear choice between a part made here and one made overseas then I'll definitely take the part made here... even if it means spending a little more.

Me too...I try to support the CAn/US economy as best as possible when ever possible, just sometimes the 'we hate cause your not from here' mentality gets to me, especially being the parent of a little one from that region..guess I'm just a little touchy bout that in my old age.

Strype · Jul 19, 2006

I gotta check and make sure my Accufab opens all the way. Yea DMAN my wifey is half middle eastern so I know what ya mean

DMAN302 · Jul 19, 2006

Me too...

Just HOW BAD are the Prof Products TBs???

Member

New Member

Hey guys, guess what--I have a bi-pass!!!

My Grandpa has great wood.

lover of pudgy polygamists

The 5 Minute Plan Man

Active Member

New Member

I'd like to remain having one chocolate starfish

Member

My mom says thanks for the pearl necklace.

Member

New Member

Member

New Member

Member

New Member

My mom says thanks for the pearl necklace.

Cuthbert catcher

My mom says thanks for the pearl necklace.

Similar threads

Privacy & Transparency

Privacy & Transparency