keep moulding in shape? armorall?

No, that stuff is all done for when it gets hard. The moldings around my 88 doors I used on Hack Job just crumbled when I pulled them out. I bought the new stuff from 50resto and it fit pretty darn good for aftermarket stuff. Not perfect like the factory, but good enough. It didn't leak.
 
Maintain your new rubber seals by getting some silicon lubricant that comes in a spray can. Spray some on a cloth and wipe it on the seals. Don't use WD-40 or any oil based lubricant on rubber, it can degrade it over time.
 
Maintain your new rubber seals by getting some silicon lubricant that comes in a spray can. Spray some on a cloth and wipe it on the seals. Don't use WD-40 or any oil based lubricant on rubber, it can degrade it over time.

I used WD40 on Hack Job to get them to slip in, but that's not the 1st choice to make. Silicone spray is the best choice. But, don't use silicone spray on your car if you plan on doing any paint work in the future. You will have fisheyes coming out of your a$$.
 
i used dielectric grease on my seals in my 95vert back in the day... never had an issue till i twisted the car on the bottle