• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Keep the auto or swap to manual?

  • Thread starter Thread starter Green_Meanie
  • Start date Start date Mar 12, 2004
G

Green_Meanie

New Member
Mar 11, 2004
161
0
0
Mar 12, 2004
#1
  • Mar 12, 2004
  • #1
94 5.0 with auto tranny

For drag racing which is preferred?

Thanks.
 

88stangmangt

Active Member
Nov 25, 2003
2,332
1
48
Stafford,VA
Mar 12, 2004
#2
  • Mar 12, 2004
  • #2
manual, if you want to do some tranny things and money isnt a issue a 5-speed. if you have plunty of money to throw around put in a shift kit a bigger stall and some 4.10 and you would be set.
 
G

Green_Meanie

New Member
Mar 11, 2004
161
0
0
Mar 12, 2004
#3
  • Mar 12, 2004
  • #3
88stangmangt said:
if you have plunty of money to throw around put in a shift kit a bigger stall and some 4.10 and you would be set.
Click to expand...

The auto already has a shift kit, so I guess I am somewhat there. How does one go about choosing a stall converter?
 

gungfusemaj

Member
Dec 13, 2003
211
0
16
Bradenton Fl
Mar 12, 2004
#4
  • Mar 12, 2004
  • #4
5 speed's are fun 4 around traffic and corner's etc. I have a auto for drag and you will get better response and shifting on a straight away with a auto,....do you know what I mean? www.50resto.com for the convertor
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Mar 12, 2004
#5
  • Mar 12, 2004
  • #5
Automatics can be faster if they're built strong enough, but i'd rather be slower in the quarter and still drive a 5 speed...it's just so much more fun
 
9

91LX-5.0

New Member
Mar 9, 2004
20
0
0
Mar 12, 2004
#6
  • Mar 12, 2004
  • #6
Manuals are more fun, you can take more pride in your times, cause more skill is involved. But if your pushen crazy horsepower then a built auto will result in better translation of power to the ground. just my .02
Ben
 

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Mar 12, 2004
#7
  • Mar 12, 2004
  • #7
I don't race my car. It is strictly my daily driver with the exception of an occasional blast down the backroads. You couldn't ever persuade me to swap my AOD for a T-5. I like to drink a coke or smoke while driving. Of course I could just be getting old and lazy too .
 

88stangmangt

Active Member
Nov 25, 2003
2,332
1
48
Stafford,VA
Mar 12, 2004
#8
  • Mar 12, 2004
  • #8
Green meanie-depends on what kinda mods you have to support the extra's rrrrrrrrr's i would put in a 3k stall and some 4.10's
 
B

blk92stangg

New Member
Jan 30, 2004
583
0
0
Hawaii
Mar 13, 2004
#9
  • Mar 13, 2004
  • #9
I think you need to look at how much money it will take to get your AOD up to bulletproof status, along with a performance converter. I think a good converter will be more than a 1000 bucks, and you can get a T5 conversion for around that much.
 
S

strtracer442

New Member
Dec 12, 2003
175
0
0
Roseville,MI
Mar 13, 2004
#10
  • Mar 13, 2004
  • #10
Either or is going to require some cash, but for drag racing, the automatic is the way to go. If its a drag only,scrap the aod and get a built C4, if you still drive it on the street, have the aod beefed by one of the reputable builders. Contact a local mustang shop for recommendations. As far as the converter goes, call the manufacturer, they can steer you in the right direction depending on your mods and how you intend to drive the car.
 

sn9550

Founding Member
May 13, 2000
1,184
1
37
Charles Town, WV
Mar 13, 2004
#11
  • Mar 13, 2004
  • #11
You want to match the converter to your cam specs. The best thing to do is to talk with the converter companys for recommendations and then choose the one you like. Edge Racing, PI, TCI, GER, B&M etc. are just some of the companies.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Mar 13, 2004
#12
  • Mar 13, 2004
  • #12
You want a Precision industries torque converter! There a little pricey,but they are the "Best"! www.converter.com call them up tell them your mods and hp,,and they will tell you what stall speed will work the best.If your motor is mostly stock,youll need a 2400 stallion! If your gonna run 410's,get the 2800!! I have the 2800,with 373 gears,its a little loose.But Im getting 410's in a month,that should tighten in up a bit!! IMO,a worked auto is better for DR,,unless your a Mike Keirstead with a 5-speed!!( You really no how to power shift!) Try a converter and gears yuo will really like it.If your on a budget,I hear edge makes a good converter for half the price!
 
You must log in or register to reply here.

Similar threads

B
manual swap
  • brockb
  • Feb 9, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
232
SN95 4.6L Mustang Tech Feb 24, 2026
squeak93
G
2.3 turbo question
  • Gibby8438
  • Apr 16, 2026
  • 2.3L (N/A & Turbo) Tech
Replies
3
Views
247
2.3L (N/A & Turbo) Tech Apr 25, 2026
NXcoupe
N
R
Transmission for manual swapping a 1994-1995 GT
  • Rembrant
  • Jul 11, 2025
  • 1994 - 1995 Specific Tech
Replies
2
Views
1K
1994 - 1995 Specific Tech Jul 13, 2025
Rembrant
R
E
4.6l auto to 5.4l 6 speed
  • EastanF5
  • Jan 22, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
182
SN95 4.6L Mustang Tech Jan 22, 2026
EastanF5
E
P
67 Mustang, with the 302 want to convert auto back to the original manual
  • Pdunn
  • May 3, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
129
Classic Mustang Specific Tech May 7, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?