Kenne Bell 9psi Ic On Order!!!!!!!

[muzztangman]

congrats dan, I should be ordering mine soooon as well, can't wait...........

 

[Dan_Soprano]

good choice on the kb... so how much was the total for your setup w/ the 5% discount,,,
airforce man myself .. thanks
-fred

It came out to like $5300 after shipping and the discount. Mind you I did get the Optional cold air intake and 90mm MAF kit too. I get a $100 core deposit back when I send KB back my stock MAF sensor.

 

[Dan_Soprano]

*Update*
My kit should ship today, be at my moms house in Jersey next week!!! I really didn't expect it to ship so soon!!! Not that that's a bad thing, but I still have another 2 1/2 weeks on deployment here in Sicily!!! God I can't wait to get home!!!!

 

[2003BlackGT]

I FINALLY ordered my KB for the stang today. I got the 9PIS Intercooled kit with the whole cold air and MAS kit too!! YIIIIPPPPYYYY!!!!!!!

oh yeah. I'm poor again now. time to start saving for the forged short block!!!

Congrats on the new blower. Enjoy. Union Cty, NJ.........I grew up in
Mountainside. Have lived in Ohio since 1981 but always great to go back.
Have fun with the new buy. Mark

 

[BrightBlue00GT]

Congrats Dan!
I agree with you on the KB support... top notch in my book also. Great service, gread product and great discount policy. They didn't make me send a scan of my ID though, maybe too many scammers out there taking advantage.

Get home safe.

 

[Dan_Soprano]

Congrats on the new blower. Enjoy. Union Cty, NJ.........I grew up in
Mountainside. Have lived in Ohio since 1981 but always great to go back.
Have fun with the new buy. Mark

I know I know, :OT: , my mom works at Deerfield school in Mountianside!!

 

[Dan_Soprano]

Congrats Dan!
I agree with you on the KB support... top notch in my book also. Great service, gread product and great discount policy. They didn't make me send a scan of my ID though, maybe too many scammers out there taking advantage.

Get home safe.

thanks bro!! Hey, how long did it take you for your install?? I plan on doing it on my post deployment leave out in the freezing cold in NJ. I don't know if thats a good idea though........It would REALLY suck to crack that aluminum manifold while torquing it down in the cold!!!

 

[BrightBlue00GT]

thanks bro!! Hey, how long did it take you for your install?? I plan on doing it on my post deployment leave out in the freezing cold in NJ. I don't know if thats a good idea though........It would REALLY suck to crack that aluminum manifold while torquing it down in the cold!!!

Dan, it took me about 3 days to actually complete the blower, but I was actually at it longer due to the other parts I was putting on, and waiting for the pcm to come back. Since I had to ship my pcm back, I had time, so I took it, and put on the valve covers and tinkered here and there. Non-stop though? I would say 3 days on average, 2 if you're lucky on every step.

The cold? Can't get it inside anywhere? I'd have to really think about that if I were doing it. As you say, you hate to mess up the intake, or anything due to the cold.

From hotter than hell to freezing in NJ... it'll be good to be home though right?

 

[Dig-It]

... And hey, for all you other military guys out there, KB gives a 5% discount if you send them a fax of your military ID card!!!! ...

5% discount!?! Man, I wish I'd known that! Well *****, I guess I spent about $300 more than I had to on the blower and intake kit!! Sure wish someone would mentioned something about a military discount a lot sooner (like Kenne Bell!)

 

[smokin'Red35th]

Thanks!!! I am still on deployment for the next 3 weeks or so in Sicily. I figured that if I ordered it now it should be there by the time I get back. It'll make for a NICE post deployment leave project!!!!

Hey, off the subject but how is sicily? I will be stationed at aviano this sept.
I CANT WAIT!!! I am in korea now tho.

 

[smokin'Red35th]

good choice on the kb... so how much was the total for your setup w/ the 5% discount,,,
airforce man myself .. thanks
-fred

diddo, where you stationed? Korea here

 

[Playground60]

Congrats Dan!
I agree with you on the KB support... top notch in my book also. Great service, gread product and great discount policy. They didn't make me send a scan of my ID though, maybe too many scammers out there taking advantage.

Get home safe.

Give us some number for the KB KIT ,I never read number on a 1/4 from a guy you have one !!

Foget the dyno sheet from them ...I got Gt2002 (Stock engine) and run last october 12,98 @ 104 Mph

Want to install one but i never see number from a custumer you install one if same one have number with prouve PLEASE let me know I will not spend 6000,00$ whit no comment for a customer !

Thank's for your help.

Playgroun60

Ford Mustang GT 2002
4.6 2V SHOC Grey Mineral

Densecharger 100MM (air flow)
Pro 5.0 (shifter)
Bassani X pipe Offroad (w/o) catalyzer
Exhaus Mac Catback
4.10 gear
Back Tires : Hoosier Quick Time Pro 27 X10.5 X15
Weld Racing Prostar 15 X 4 front Tires : Kelly Radial metric 165 R15 86S
Weld Racing Prostar 15 X 8
Tires Screw
Frame connector Kenny Bell

Driveshaft Aluminium
Thermostat 180 C

Ford Racing Tach light + Braket
Tempeture Gauge
Oil presure Gauge
Line-lock
Shocks ( Illuminas 5p)
Lower controlarm
Upper controlarm

1/4 Mille 12.983 @ 104,679 Mph
1/8 8.264
60 Fts 1.734

 

[Dan_Soprano]

Hey, off the subject but how is sicily? I will be stationed at aviano this sept.
I CANT WAIT!!! I am in korea now tho.

Sigonella, Sicily, where I am is a TOTAL craphole. it is really dirty. The chicks are hotter then hell here though!!!!!! I am just here on deployment, so I don't know how I would feel about being here for more then 6 months. It's not all that bad though, it's mid-Jan and still in the 60's. Oh well. Good luck in Aviano. Northern Italy is beautiful!!!

 

[Dan_Soprano]

5% discount!?! Man, I wish I'd known that! Well *****, I guess I spent about $300 more than I had to on the blower and intake kit!! Sure wish someone would mentioned something about a military discount a lot sooner (like Kenne Bell!)

You should call or email them. I'm sure that they would make it right with you. They are great about that stuff!!!

 

[Dan_Soprano]

Dan, it took me about 3 days to actually complete the blower, but I was actually at it longer due to the other parts I was putting on, and waiting for the pcm to come back. Since I had to ship my pcm back, I had time, so I took it, and put on the valve covers and tinkered here and there. Non-stop though? I would say 3 days on average, 2 if you're lucky on every step.

The cold? Can't get it inside anywhere? I'd have to really think about that if I were doing it. As you say, you hate to mess up the intake, or anything due to the cold.

From hotter than hell to freezing in NJ... it'll be good to be home though right?

I can probably pull the car into my dad's garage for the actual torquing down part. Not alot of room though. I will have to see. I just figured that it would be a good stress relief to sit around and work on the car all day. My dad's a mechanic and the garage is full of his crap from his Chevy resto's plus the 4 roller boxes of tools and the work bench. He hates fords which kinda sucks too. Oh well, I will make it work. I may just have to wait and do it at the auto hobby shop on base in maine like you did.

 

[Playground60]

Give us some number for the KB KIT ,I never read number on a 1/4 from a guy you have one !!

Foget the dyno sheet from them ...I got Gt2002 (Stock engine) and run last october 12,98 @ 104 Mph

Want to install one but i never see number from a custumer you install one if same one have number with prouve PLEASE let me know I will not spend 6000,00$ whit no comment for a customer !

Thank's for your help.

Playgroun60

Ford Mustang GT 2002
4.6 2V SHOC Grey Mineral

Densecharger 100MM (air flow)
Pro 5.0 (shifter)
Bassani X pipe Offroad (w/o) catalyzer
Exhaus Mac Catback
4.10 gear
Back Tires : Hoosier Quick Time Pro 27 X10.5 X15
Weld Racing Prostar 15 X 4 front Tires : Kelly Radial metric 165 R15 86S
Weld Racing Prostar 15 X 8
Tires Screw
Frame connector Kenny Bell

Driveshaft Aluminium
Thermostat 180 C

Ford Racing Tach light + Braket
Tempeture Gauge
Oil presure Gauge
Line-lock
Shocks ( Illuminas 5p)
Lower controlarm
Upper controlarm

1/4 Mille 12.983 @ 104,679 Mph
1/8 8.264
60 Fts 1.734

NO NUMBER'S ???? COME ON GUY'S......NO BODY'S WHEN TO THE DRAGWAY WHIT THE 9PSI INTERCOOLER AND SPEND SO MUCH MONEY.

I HOPE YOU CAN GIVE ME A IDE...?

 

[BrightBlue00GT]

Hey, off the subject but how is sicily? I will be stationed at aviano this sept.
I CANT WAIT!!! I am in korea now tho.

Where are you here in Korea? I assume USAF? Osan, Kunsan? 607th in Yongsan? My office is in Yongsan, but I live down near Osan (retired USAF).

Playground60 - I updated my sig about 2 months ago with my numbers from the dyno in Seoul and the run down the quarter in Yongin.

 

[Dan_Soprano]

NO NUMBER'S ???? COME ON GUY'S......NO BODY'S WHEN TO THE DRAGWAY WHIT THE 9PSI INTERCOOLER AND SPEND SO MUCH MONEY.

I HOPE YOU CAN GIVE ME A IDE...?

I'll let you know in a few months once the install is done and the tracks in the North East open back up. should be around april or so when they open.

 

[Playground60]

BrightBlue00GT

Where are you here in Korea? I assume USAF? Osan, Kunsan? 607th in Yongsan? My office is in Yongsan, but I live down near Osan (retired USAF).

Playground60 - I updated my sig about 2 months ago with my numbers from the dyno in Seoul and the run down the quarter in Yongin.

BrightBlue00GT Maby you can help me

Before you install your KB whant was your E.T.
You roth 11,9?? with KB,if that is the only mod. that you and I will finally have me answer.
Before..... and after......

Only what to who much time you save with the KB

Thank

 

[BrightBlue00GT]

BrightBlue00GT Maby you can help me

Before you install your KB whant was your E.T.
You roth 11,9?? with KB,if that is the only mod. that you and I will finally have me answer.
Before..... and after......

Only what to who much time you save with the KB

Thank

No the KB is not the only mod. I have a complete list in My Mods Database below, but in a nutshell I've added:
- 90mm Lightening MAF
- 75mm FRP TB
- KB CAI
- KB TB/MAF Big Tube
- KB Boost-Spark
- Denso IT20 plugs
- ProChamber
- Steeda/Borla Catback
- FRPP 3.73's

I didn't go to the track prior to the KB install. It's a PITA to hit the track over here, and it just wasn't worth it knowing I'd be up in the high 13's anyway.