kenne bell install questions

[Red1995GT]

Does anyone have any helpful hints on getting the Allen Head bolts the middle/back of the kenne bell where it bolt to the lower intake?

Does anyone know where to find a female cap fitting to block off the EGR tube from a bbk header(stock size is probably the same)?
I've been looking all around localy and no stores have them.

 

[Stanger007]

Does anyone know where to find a female cap fitting to block off the EGR tube from a bbk header(stock size is probably the same)?
I've been looking all around localy and no stores have them.

I got mine from: http://www.wazeepulleys.com/9495parts/9495parts.htm

It looks like he's out of stock but they are very nice pieces.

 

[Hef5.0weisen]

looking from the front of the car (for reference), I'm guessing you're talking about the aft right hand side fastener???...I used a stud in the lower, then a washer and nut...tightened it down with a small box end wrench. Just my 2 cents, but for the right hand side middle...I replace it every time I take the blower off...KB sends you the long t-handle wrench to get to it (ball end), but when you (I) tightne it down, it always seems to wanna strip out...seems to me like a one shot deal...don't wanna mess with that one once the internal wrenching portion of the bolt is gone....
good luck, hope that helped some
Brian

 

[Red1995GT]

thanks for you help guys