• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Key ignition swtich problem

  • Thread starter Thread starter Fuzion
  • Start date Start date Sep 6, 2009

Fuzion

Member
May 24, 2005
81
0
6
Virginia
Sep 6, 2009
#1
  • Sep 6, 2009
  • #1
I turn the key the car starts perfectly fine, but when i release the key, the car shuts off. I am guessing the key switch has gone bad. If i turn the car on and hold the key so that it does not fully release, the car will stay on.

Anybody have a write up on how to replace the key cylinder? Or the part number i need?

Thanks in advance.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,811
234
Dublin GA
Sep 6, 2009
#2
  • Sep 6, 2009
  • #2
Replace the electrical part of the switch first.

There was a FREE recall on Ford ignition switches. They overheat and sometimes catch fire. That burns up the steering column and sometimes the car interior. Since this is very old information, you may not be able to get the switch replaced for free anymore. The auto parts stores sell the switches for $13-$15.

Copy down you VIN number and call the Ford dealer nearest you. Tell them you want to see if the ignition switch recall for Fords & Mustangs was done on your car. They will ask for the VIN number & check it against the master database. If it isn't in the database, then you can schedule an appointment to have the switch replaced for free. The TSB is #95S28. They will not give the part so that you can install it. The rules of the recall are that they must install the switch to prevent any legal problems.



Saleen0679 was nice enough to dig this up for us awhile back: Replace a 1979-1993 Ignition Switch Assembly
 

Fuzion

Member
May 24, 2005
81
0
6
Virginia
Sep 6, 2009
#3
  • Sep 6, 2009
  • #3
Thanks a lot for your help, my issues are solved. The mustang is back out terrorizing the streets.
 
You must log in or register to reply here.

Similar threads

Engine Fuel not pumping
  • Creomod
  • Apr 13, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
43
Views
695
Fox 5.0 Mustang Tech May 3, 2026
Shakerhood
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
67
SN95 4.6L Mustang Tech May 21, 2026
n0v8or
N
H
Engine 1992 mustang LX starting issue
  • Hdbandit
  • May 25, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
135
Fox 5.0 Mustang Tech May 25, 2025
General karthief
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
126
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
N
Power door lock motor Question
  • NYFox
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
180
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 17, 2026
NYFox
N
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?