King Cobra clutch...............

M

monsters

New Member

Jul 20, 2005

16

0

0

Jul 25, 2005

#1

• Jul 25, 2005

• #1

I just put in a king cobra clutch this weekend and had the flywheel turned, I have a BBK adjustable clutch cable and can't seem to get enough travel to disengage the clutch now. The cable is adjusted all the way on both ends, any ideas? I think I may have to shim the ball stud and try a new fork.

car is an 87 gt conv. 5.0 5speed.

 

M

monsters

New Member

Jul 20, 2005

16

0

0

Jul 25, 2005

#2

• Jul 25, 2005

• #2

Is it possible that the cable had come off of the quadrant on the pedal but is still attached and pulling?

 

Q

quikrnu

New Member

Mar 11, 2002

30

1

0

Canada

Jul 25, 2005

#3

• Jul 25, 2005

• #3

My suggestion is take the BBK cable out and replace it with a Ford OEM one. I just took that exact cable out after 2 weeks, had same clutch installed also. Clutch feels back to normal now!

 

M

monsters

New Member

Jul 20, 2005

16

0

0

Jul 25, 2005

#4

• Jul 25, 2005

• #4

did yours do the same thing?

 

M

monsters

New Member

Jul 20, 2005

16

0

0

Jul 25, 2005

#5

• Jul 25, 2005

• #5

I just don't understand how it could work one minute and then after replacing a part with an exactly the same item that it would need that much adjustment.

The first time I put my foot on the clutch it made a snapping noise then I adjusted it and it worked somewhat but there is no more adjustment.

 

sirr0bin

New Member

Jul 18, 2003

174

0

0

Winnipeg, Manitoba

Jul 25, 2005

#6

• Jul 25, 2005

• #6

monsters said:

I just don't understand how it could work one minute and then after replacing a part with an exactly the same item that it would need that much adjustment.

The first time I put my foot on the clutch it made a snapping noise then I adjusted it and it worked somewhat but there is no more adjustment.

Click to expand...

your cable probably stretched. mine did the same, then snapped right away

my replacement OEM cable is fine, however

 

Q

quikrnu

New Member

Mar 11, 2002

30

1

0

Canada

Jul 25, 2005

#7

• Jul 25, 2005

• #7

monsters said:

I just don't understand how it could work one minute and then after replacing a part with an exactly the same item that it would need that much adjustment.

The first time I put my foot on the clutch it made a snapping noise then I adjusted it and it worked somewhat but there is no more adjustment.

Click to expand...

Mine stretched more than expected, and no matter how it was installed rattled the dash when depressing it, made car VERY difficult to drive, and left leg was quivering after short time, as clutch was so hard to press. Mine was almost at end of adjustment also.

 

Daniel50

New Member

Mar 30, 2005

716

1

0

Discovery Bay, CA

Jul 25, 2005

#8

• Jul 25, 2005

• #8

id also go with the ford unit. cannot beat oem in quaility

 

just4bob50

Active Member

Apr 2, 2005

504

5

28

Pa.

Jul 25, 2005

#9

• Jul 25, 2005

• #9

i have the same clutch with a summit adj. quad. with fire wall adjuster. had it tin for about 6 months now and no probs

 

V

v8only

Active Member

Jul 3, 2003

2,378

22

49

Jul 26, 2005

#10

• Jul 26, 2005

• #10

that snapping sound was your giveaway, get a new cable, your old one is toast.

 

M

monsters

New Member

Jul 20, 2005

16

0

0

Jul 26, 2005

#11

• Jul 26, 2005

• #11

yea, but the fact is that it still works right it just doesn't have enough travel, and when I did step on it the adjustment on the trans was bottomed out and the firewall adjuster was all the way out (about 2 threads into firewall). I'm starting to think the quadrant broke and the thing isn't pulling all the way. Can I use an OEM cable with a alum quadrant and a firewall adjuster? I also found at napa that '87 cars have 2 different lengths of cables, anyone know which one it is?

 

M

monsters

New Member

Jul 20, 2005

16

0

0

Jul 26, 2005

#12

• Jul 26, 2005

• #12

Actually, the snap sounds like the quadrant shredded, since the cable won't adjust by pulling the pedal up now. I'm going to tear into it tonight.....

 

V

v8only

Active Member

Jul 3, 2003

2,378

22

49

Jul 26, 2005

#13

• Jul 26, 2005

• #13

don't use parts stores cables, they are worse than what is coming off. buy only a ford original cable. You can get them from maximum motorsport, or buyfordracing.com cheaply. Use like you said, with the quadrant and firewall adjuster. If you have an aluminum quadrant, it didn't break. If you have the oem plastic one, it's very likely.

 

M

monsters

New Member

Jul 20, 2005

16

0

0

Jul 26, 2005

#14

• Jul 26, 2005

• #14

Thanks

 

M

Mysterio

New Member

Oct 6, 2004

101

0

0

Lakewood, Ohio

Jul 26, 2005

#15

• Jul 26, 2005

• #15

WHen I put my king cobra clutch in I had to pump the clutch pedal a few times before the cabel adjusted enough to disengage the clutch. I had that self adjusting thing though apparently in my car.