O.K. I just went outside and looked at the angle and there is a big difference in angle the tie rods are straight and the a-arm goes downward I would say about a 25-30degree difference.
krazy steering after 5 lug swap
- Thread starter KENS89LX
- Start date
Snikt89GT
New Member
A pic would help too.
You can't go wrong with maximum motorsports, that's the bump steer kit that I went with.
You can't go wrong with maximum motorsports, that's the bump steer kit that I went with.
If there is a different angle(make sure you are looking at the flat lip bottom portion of the a-arm) then you a fine candidate for a bump steer kit. I shopped around and got a really good deal on a UPR kit. I personally prefer the tapered bolt type versus the style that requires drilling of the spindle. Basically just shop around and find the best price. I found mine on ebay for $75
I did a swap on my 92 GT vert went with Cobra R's and had trammeling until I got new tires. I am going to swap my 88GT Hatch next so this is good info for me. So basically before I do the swap I will need the bumpsteer? Or is there a chance I wont? Car is not lowered but I plan to. Should I invest in all that stuff CC plates, bumpsteer, new rack and tie rods?
