Maryland Stang told me to do the following on
06-02-07, 11:50 AM
--------------------------------------------------------------------------------
I won't use poly bushings in upper control arms. The arms move around too much on the street and the poly bushings can cause axle bind up.
I bought inexpensive uppers for mine and ended up have to spend more money to replace the cheap rod ends that were included.
Do yourself a favor and buy good arms to begin with like these...
http://store.summitracing.com/partde...5&autoview=sku
Chuck the ploy bushings that come with the arms in the trash and get a set of rubber bushings from your local Ford dealer to fit a 94/95 Mustang.
I got my bolt-in torque box reinforcements off of eBay although a quick check of some other "quality" bolt-in TBRs showed them all to be virtually the same. In fact the TBRs I got from eBay had the same instruction sheet as the ones that UPR sells.
Your car will definately feel much stiffer after the installation. Don't forget to get weld-in subframe connectors too.
I CANNOT buy the rubber bushings fpr this control arm. Looks like I am screwed then. Im having them installed anyway I guess

This is the thread I started earlier about what to buy.
http://forums.stangnet.com/showthread.php?t=698644&highlight=upper+control+arms