I am taking my car to the track tomorrow, does anyone have any suggestions for a launch rpm or what rpm's to shift at. Also when you guys launch do u just drop the clutch or ease off of it.
You really have to test what works best for you. Try all different launch rpms.
Usually on slicks you just drop the clutch but on street tires you'll just get a ton of smoke so you'll have to ease it out.
If you're running whats in your sig, then shift no later then 52-5300 RPMs, there's no point in revving it higher. When I launch, I bring the tach up to the peak of the torque curve then slip the clutch out. Since I'm not running many more mods then you are then we should be about stock anyways, around 3200 RPMs. If you're running streets then do just enough burnout to clear the crap off them, don't roast them. Street tires are made to grip under normal temperatures, heating them up doesn't help them. DON'T go through the water box on street tires, you'll just end up hurting your traction and spraying water everywhere during your run which pisses of the techs because they gotta make sure your car didn't spray some kind of coolant/lubricant everywhere.
If you head over to the racers tech section and peruse those boards there is ton of info.
does the same thing go for my 95 cobra....i usually shift near redline, i still havent figured out how to launch. i just came from driving a civic. i usually rev up to 2k and even there it just spins the tires and i hafta let off then get on it when it gains traction.