• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2010 - 2014 Specific Tech

Let's Rumble-not!

  • Thread starter Thread starter RDTVFR
  • Start date Start date May 21, 2012

RDTVFR

Member
Mar 11, 2012
22
0
12
May 21, 2012
#1
  • May 21, 2012
  • #1
My 2012, with 6sp manual tranny, has an occasional shudder when I let off the gas and let the engine drag my speed down. It goes away if I hit the gas, clutch or if the engine drop about another 500 from where the shudder started. I've seen the shudder perfectly described concerning the automatic trannys but jack about the manuals. Help?
 

mustangmike6996

5 Year Member
Nov 10, 2005
483
6
29
clinton twp, MI
May 23, 2012
#2
  • May 23, 2012
  • #2
does the shudder only happen when the clutch is partially depressed (warped flywheel or hotspotted pressure plate) or does it happen every time the gas is let off. could be a bearing issue. could be a bad tire. does it happen at certain speeds? how many miles are on the car? what RPM does this happen at? the RPM will drop when you let off the gas/ depress the clutch. itll idle down slowly for shifting/EPA C.A.R.B. emissions purposes.
 

RDTVFR

Member
Mar 11, 2012
22
0
12
May 23, 2012
#3
  • May 23, 2012
  • #3
No, if I touch the clutch at all or apply gas the shudder disappears. It doesn't always happen but when it does, it's after I either let off or feather the gas. The tires look fine, pressures verified good. It tends to vary in terms of speed and RPM but it seems more speed/RPM means more intense shudder. I've noticed it the most at 2250RPM though it's happened at 3kRPM. When I let off the gas sometimes the RPMs drop a bit before the shudder happens but when it does it goes away after another 500RPM drop.
 

mustangmike6996

5 Year Member
Nov 10, 2005
483
6
29
clinton twp, MI
May 26, 2012
#4
  • May 26, 2012
  • #4
possibly a pinion or center carrier bearing. also maybe an out of balance driveshaft. does it happen in all gears at that rpm or just a few gears?
 

RDTVFR

Member
Mar 11, 2012
22
0
12
Jun 17, 2012
#5
  • Jun 17, 2012
  • #5
It happens in several gears but is most common in 3rd and 4th. I took her to the Ford shop last week and kidnapped the tranny guy for a ride. Once he felt the shudder (took a bit to get it to perform) he explained the flywheel can do that when the drive force it's dealing with comes from the wheels instead of the engine.

PS: Sorry for the slow reply, work's been a mother in law...
 
You must log in or register to reply here.

Similar threads

S
1998 Mustang Gt Rattling sound, cannot locate. Video included
  • studerman1
  • Mar 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
158
1996 - 2004 SN95 Mustang -General/Talk- Apr 1, 2026
studerman1
S
D
Engine 85 GT Backfires through Carb
  • DienstXIV
  • Oct 3, 2025
  • Fox 5.0 Mustang Tech
Replies
19
Views
581
Fox 5.0 Mustang Tech Oct 7, 2025
85GTStangGuy
Drivetrain Vibration in clutch pedal and shudder noise when engine is lugging
  • AnthonyA1234
  • Jan 8, 2024
  • 2015 - 2023 Specific Tech
Replies
0
Views
1K
2015 - 2023 Specific Tech Jan 8, 2024
AnthonyA1234
F
Trouble Shooting Sudden Shift of AFR at low RPM
  • Farva_84
  • Jun 6, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
447
SN95 4.6L Mustang Tech Jun 8, 2025
Farva_84
F
New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
259
The Welcome Wagon Oct 19, 2025
Clutchfork
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2010 - 2014 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?